Solved

Hyper-V Server 2012r2 won't start up "synthetic scsi controller failed to finish reserving resources 0x80070002"

Posted on 2014-10-16
2
1,965 Views
Last Modified: 2014-11-12
I have an instance of Server 2012 r2 that won't start up from the saved state it gets to about 90% and then gives the error:

synthetic scsi controller failed to finish reserving resources 0x80070002

There doesn't seem to be much on the net about this, can anyone advise what steps should be taken to recover from this?

Siv
0
Comment
Question by:Siv
  • 2
2 Comments
 

Accepted Solution

by:
Siv earned 0 total points
ID: 40383867
Please ignore this question I have figured out what the issue was, it appears when the host machine rebooted after applying Windows Updates it had lost the connection to a backup drive that is plugged into the host machine. When I removed and then plugged the USB drive back in it re-appeared in the disk manager and then the virtual machine would boot up.

Don't understand why Hyper-V refuses to start just because a backup drive is not connected?

Siv
0
 

Author Closing Comment

by:Siv
ID: 40383868
Doh!
0

Featured Post

Best Practices: Disaster Recovery Testing

Besides backup, any IT division should have a disaster recovery plan. You will find a few tips below relating to the development of such a plan and to what issues one should pay special attention in the course of backup planning.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

You might have come across a situation when you have Exchange 2013 server in two different sites (Production and DR). After adding the Database copy in ECP console it displays Database copy status unknown for the DR exchange server. Issue is strange…
OfficeMate Freezes on login or does not load after login credentials are input.
This tutorial will walk an individual through the process of transferring the five major, necessary Active Directory Roles, commonly referred to as the FSMO roles from a Windows Server 2008 domain controller to a Windows Server 2012 domain controlle…
This tutorial will walk an individual through the process of installing of Data Protection Manager on a server running Windows Server 2012 R2, including the prerequisites. Microsoft .Net 3.5 is required. To install this feature, go to Server Manager…

832 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question