Solved

Creating Vlans

Posted on 2014-10-17
1
200 Views
Last Modified: 2014-10-17
I am deploying a new ASA 5545 in a network and the client wants to have a few of their networks segregated into VLANS.

Can deploying the VLANs be done by setting the ports on the router to the individual VLANS?  I realilze that I will still have to creating VLAN tags on the switches as well.
0
Comment
Question by:beckredder
1 Comment
 
LVL 12

Accepted Solution

by:
DarinTCH earned 500 total points
Comment Utility
yes........you can build vlans at either the router level or the switch level
you can have each switch support 1 vlan and the router routes between them
or you can have multiple vlans active on different ports on the same switch

you can use L2 mac address @ switch
or L3 - ip addresses @ router or if your switch supports L3 ( probably the more popular simple solution)
then create some vlans and and add description - almost done

hear is a simple config clip - http://aconaway.com/2008/04/01/setting-up-vlans-on-an-asa-5505/

you can read Cisco press - just not @ bedtime...lol
http://www.cisco.com/c/en/us/td/docs/security/asa/asa72/configuration/guide/conf_gd/int5505.pdf
or there are some good youtube videos
0

Featured Post

Do You Know the 4 Main Threat Actor Types?

Do you know the main threat actor types? Most attackers fall into one of four categories, each with their own favored tactics, techniques, and procedures.

Join & Write a Comment

There are times where you would like to have access to information that is only available from a different network. This network could be down the hall, or across country. If each of the network sites have access to the internet, you can create a ne…
There are two basic ways to configure a static route for Cisco IOS devices. I've written this article to highlight a case study comparing the configuration of a static route using the next-hop IP and the configuration of a static route using an outg…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

743 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

15 Experts available now in Live!

Get 1:1 Help Now