Solved

Wireless LAN

Posted on 2014-10-17
5
360 Views
Last Modified: 2014-10-20
I have set  up a  Cisco 2504 which is working well with A production ssid  and a guest ssid.
i would like to setup  mac addreses filtering on the production SSID so that  only users with a a known mac address  can access the WLAN.
Has any  created this solution.
0
Comment
Question by:thombie
  • 3
  • 2
5 Comments
 
LVL 45

Accepted Solution

by:
Craig Beck earned 500 total points
ID: 40390097
It's easy enough.  Here's a great step-by-step...

http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/91901-mac-filters-wlcs-config.html#conf-wlan

You can still use 802.1x or PSK - the example just shows the steps to enable MAC filtering.
0
 

Author Comment

by:thombie
ID: 40392116
Thank you That worked 100%
  can ask another question. if you dont mind.
How do a setup   user name and password authentication  to a WLAN  with using  AAA server. just using the local database.
0
 

Author Comment

by:thombie
ID: 40392237
I've requested that this question be closed as follows:

Accepted answer: 0 points for thombie's comment #a40392116

for the following reason:

Quick and easy.
0
 
LVL 45

Expert Comment

by:Craig Beck
ID: 40392238
You need to select my post as the answer if you agree it was 'the answer', then open another question and send me an IM with the link so I can answer that for you too.
0
 

Author Closing Comment

by:thombie
ID: 40392266
Thank you for this solution it worked great first time.
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
IP Calculator 10 53
ASA - RV130 VPN tunnel, cannot pass traffic 8 45
DNS @ Naked Domain Record 5 61
How to list which IP address is the managed switch in my company ? 13 86
ADCs have gained traction within the last decade, largely due to increased demand for legacy load balancing appliances to handle more advanced application delivery requirements and improve application performance.
In this article, I am going to show you how to simulate a multi-site Lab environment on a single Hyper-V host. I use this method successfully in my own lab to simulate three fully routed global AD Sites on a Windows 10 Hyper-V host.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

930 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

10 Experts available now in Live!

Get 1:1 Help Now