Solved

ASA 5500 boot variable

Posted on 2014-10-22
3
1,109 Views
Last Modified: 2014-10-22
I have na asa that the boot variable is one ios version and the current BOOT variable is another version. How do I fix this, is it a problem?


BOOT variable = disk0:/asa914-k8.bin
Current BOOT variable = disk0:/asa914-k8.bin
CONFIG_FILE variable =
Current CONFIG_FILE variable =
0
Comment
Question by:tolinrome
  • 2
3 Comments
 
LVL 6

Expert Comment

by:Matt
ID: 40396872
Define boot in your config

boot system disk0:/asa914-k8.bin

Save config

copy running-config startup-config

or

write memory

At the end

show running | i boot
0
 
LVL 7

Author Comment

by:tolinrome
ID: 40396928
sorry, I think I pasted the wrong command above, what I meant was. I copied over to flash code asa915 and did a:
#)boot system flash:/asa915-k8.bin. Then up bootup after a reload I get:

Cannot find disk0:/asa914-k8.bin

Error 15: File not found

Loading disk0:/asa915-k8.bin... Booting...
Platform ASA5505

The I do a #show bootvar and get this below.

BOOT variable = disk0:/asa914-k8.bin;disk0:/asa915-k8.bin
Current BOOT variable = disk0:/asa914-k8.bin;disk0:/asa915-k8.bin
CONFIG_FILE variable =
Current CONFIG_FILE variable =
0
 
LVL 6

Accepted Solution

by:
Matt earned 500 total points
ID: 40396943
When you add boot command, you actually append filenames of boot images, separated by semicolon.
if you type

show runnig | i boot

you Will see that you first boot line is asa914-k8.bin, and the second line asa915-k8.bin

OK, to fix this problem:

conf t
no boot system disk0:/asa914-k8.bin
write memory
0

Featured Post

VMware Disaster Recovery and Data Protection

In this expert guide, you’ll learn about the components of a Modern Data Center. You will use cases for the value-added capabilities of Veeam®, including combining backup and replication for VMware disaster recovery and using replication for data center migration.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

I recently attended Cisco Live! in Las Vegas, a conference that boasted over 28,000 techies in attendance, and a week of hands-on learning hosted by a solid partner with which Concerto goes to market.  Every year, Cisco displays cutting-edge technol…
Use of TCL script on Cisco devices:  - create file and merge it with running configuration to apply configuration changes
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…

829 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question