Solved

CAS server to different network

Posted on 2014-10-23
5
44 Views
Last Modified: 2014-10-27
Hi,

I was wondering how I can move my CAS 2010 from one network to another.  I have already created the subnet under the AD site and services.  I am not moving my exchange HUB and Mailbox server just the CAS has to be moved.  The AD site consists of both networks.

I cannot find anything on the internet on this.
0
Comment
Question by:FundFire
  • 3
  • 2
5 Comments
 
LVL 63

Expert Comment

by:Simon Butler (Sembee)
ID: 40401228
That is because you cannot do it.
If you have multiple sites then you MUST have a CAS (and Hub Transport) in the same AD site as the mailboxes. You cannot separate them out.

This normally isn't a problem as best practise is now to have all roles on all servers. Therefore if you are moving the CAS entry point to another site, simply add the CAS role to the hub transport or mailbox role server.

Simon.
0
 

Author Comment

by:FundFire
ID: 40401975
I believe I can do that; have CAS and hub transport server on the same server, but I really don't want to do it.  Please note that both the CAS server and HUb Transport WILL BE on the same AD site.  The AD site will have 2 separate network assign to it.  So, will I have a problem?
0
 
LVL 63

Accepted Solution

by:
Simon Butler (Sembee) earned 500 total points
ID: 40402117
It is not recommended to try and dual home a CAS server.
Are the servers in the same physical location?
Changing the IP address of the CAS server isn't a problem, but AD sites and services and the placement of the server is crucial to having it perform well.

Why don't you want to put hub and CAS on the same server? I haven't done a design with the roles separate for over three years - and that includes some of the biggest Exchange implementations in Europe.

Simon.
0
 

Author Comment

by:FundFire
ID: 40402135
OK.  I got it, it is not recommended but possible.  You see, I already have the server.  The server is virtual and I have already configured all the MAPI, POP3, Certificate and all other crap on it.  If I have to add it to my Hub Transport then I have to redo everything, not a big deal but I don't want to deal with it.
0
 
LVL 63

Expert Comment

by:Simon Butler (Sembee)
ID: 40405410
CAS takes about ten minutes to configure and I would encourage you to do it that way.

Simon.
0

Featured Post

Don't lose your head updating email signatures!

Do your end users still have the wrong email signature? Do email signature updates bore you or fill you with a sense of dread? You can make this a whole lot easier on yourself by trusting an Exclaimer email signature management solution. Over 50 million users do...so should you!

Join & Write a Comment

"Migrate" an SMTP relay receive connector to a new server using info from an old server.
Learn to move / copy / export exchange contacts to iPhone without using any software. Also see the issues in configuration of exchange with iPhone to migrate contacts.
In this video we show how to create a Contact in Exchange 2013. We show this process by using the Exchange Admin Center. Log into Exchange Admin Center.: First we need to log into the Exchange Admin Center. Navigate to the Recipients >> Contact ta…
In this video we show how to create an email address policy in Exchange 2013. We show this process by using the Exchange Admin Center. Log into Exchange Admin Center.:  First we need to log into the Exchange Admin Center. Navigate to the Mail Flow…

705 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

15 Experts available now in Live!

Get 1:1 Help Now