Solved

Windows server 2012 R2 NTP change time automatically

Posted on 2014-10-26
5
1,176 Views
Last Modified: 2014-11-07
Hi,

We have 2 DC's with 2012 R2. Both are acting as NTP servers (VMware based).

The main DC (DC01) update its time from the internet while DC02 updates from DC01.
DC02 keep CORRECT time.
DC01 sometimes changes 2 hours ahead.

Please advise.

Thanks
0
Comment
Question by:IT_Group1
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
5 Comments
 
LVL 55

Expert Comment

by:andyalder
ID: 40404942
What timezone is DC01 set to and what country is it located in physically?
0
 
LVL 10

Expert Comment

by:Gajendra Rathod
ID: 40404946
Please check Time sync of DC01 with VmWare host. link
It should be disable.
0
 
LVL 14

Expert Comment

by:frankhelk
ID: 40408071
Just curious:

Since DC2 is intended as backup machine (I presume it's on BDC role), why don't you sync it from internet, too ? That would increase reliability of the entire computing ensemble.

In that case all dependent workstations need two "server" in their config.
0
 

Accepted Solution

by:
IT_Group1 earned 0 total points
ID: 40418147
Guys, problem solved by one of our IT guys, thanks for assisting.
0
 

Author Closing Comment

by:IT_Group1
ID: 40427998
It was solved by its own
0

Featured Post

Independent Software Vendors: We Want Your Opinion

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In this article, I show you step by step with screenshots to assist you - HOW TO: Deploy and Install the VMware vCenter Server Appliance 6.5 (VCSA 6.5), with some helpful tips along the way.
When rebooting a vCenters 6.0 and try to connect using vSphere Client we get this issue "Invalid URL: The hostname could not parsed." When we get this error we need to do some changes in the vCenter advanced settings to fix the issue.
This Micro Tutorial steps you through the configuration steps to configure your ESXi host Management Network settings and test the management network, ensure the host is recognized by the DNS Server, configure a new password, and the troubleshooting…
This Micro Tutorial walks you through using a remote console to access a server and install ESXi 5.1. This example is showing remote access and installation using a Dell server. The hypervisor is the very first component of your virtual infrastructu…

717 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question