Link to home
Start Free TrialLog in
Avatar of herm paul
herm paulFlag for Guam

asked on

what is the best practice for site-to-site vpn beetween asa and netgear? Please advise.

trying to configure an asa router and netgear on vpn.  needing pointers on good practices.  Is this something duable or I can't mix routers?  Please advise,

mwauki
Avatar of John
John
Flag of Canada image

There is no problem mixing router types - I do that.

So long as the IP endpoints (internal) are different, IKE phase 1, phase 2, and pre-shared key are set up, you should be able to connect.
Avatar of herm paul

ASKER

thanks and much appreciated for the confirmation, John!

If you don't mind, asa is kinda new to me so if any, could you suggest documentations/guide, etc?  if not I can understand...thanks in advance.
ASKER CERTIFIED SOLUTION
Avatar of John
John
Flag of Canada image

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
thanks much, again, John!

for now I will ask that this be closed.

again, appreciate your insights John.
appreciate the quick feed back on this, John.  Keep up  the good work.
Thank you very much and I was happy to help. VPN is indeed complicated (many variables). When you get a bit farther down the road, ask more specific questions and you will surely get answers here.