Solved

ASA - BASE LICENSE - CLEAR XLATE

Posted on 2014-11-02
6
141 Views
Last Modified: 2014-12-05
Experts,

I have an ASA 5505 with base license.  It is protected a small office of 5-7 users. They all NAT out of the ASA's outside interface.

Sometimes a user is intermittently not able to talk out to the internet. Works fine for everyone else. When it doesn't work, the user can ping anywhere inside but not to the Internet. This happens randomly for all users.   I have discovered that when I do a "clear xlate" then the user that wasn't working is able to get on the internet again.  
It almost seems like I am reaching a max somewhere.
I am running 9.1.3 code.
0
Comment
Question by:trojan81
  • 4
  • 2
6 Comments
 
LVL 57

Expert Comment

by:Pete Long
ID: 40419445
5-7 users but how many IP addresses?

How many user Licence is the ASA - if its a 5505 it may have a 10 user licence.

ASA 5505 Determine Your License Version

PL
0
 
LVL 57

Expert Comment

by:Pete Long
ID: 40419446
Bear in mind one user with a laptop on wired and wireless is two licences gone.
0
 

Author Comment

by:trojan81
ID: 40422390
Pete long,

Are you referring to this:

Inside Hosts                      : 10             perpetual


How can I see how many HOSTS are live
0
VMware Disaster Recovery and Data Protection

In this expert guide, you’ll learn about the components of a Modern Data Center. You will use cases for the value-added capabilities of Veeam®, including combining backup and replication for VMware disaster recovery and using replication for data center migration.

 
LVL 57

Expert Comment

by:Pete Long
ID: 40422509
show conn count
0
 

Author Comment

by:trojan81
ID: 40423316
well that showed me:
43 in use, 708 most used
0
 
LVL 57

Accepted Solution

by:
Pete Long earned 500 total points
ID: 40425008
You can upgrade the licence to 50 user or unlimited :) Speak to a Cisco Reseller
(or do some googling!)
0

Featured Post

Free Tool: Subnet Calculator

The subnet calculator helps you design networks by taking an IP address and network mask and returning information such as network, broadcast address, and host range.

One of a set of tools we're offering as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Connecting to CISCO 4402 WLC 3 44
ASA ISP failover 3 23
Cisco 2960 unable to add SFP modules to device 9 64
AnyConnect VPN endpoint authentication/validation 4 16
Overview The Cisco PIX 501, PIX 506e, ASA 5505 and ASA 5510 (most if not all of this information will be relevant to the PIX 515e but I do not have a working configuration handy to verify the validity) are primarily used within small to medium busi…
I recently attended Cisco Live! in Las Vegas, a conference that boasted over 28,000 techies in attendance, and a week of hands-on learning hosted by a solid partner with which Concerto goes to market.  Every year, Cisco displays cutting-edge technol…
As a trusted technology advisor to your customers you are likely getting the daily question of, ‘should I put this in the cloud?’ As customer demands for cloud services increases, companies will see a shift from traditional buying patterns to new…
Both in life and business – not all partnerships are created equal. Spend 30 short minutes with us to learn:   • Key questions to ask when considering a partnership to accelerate your business into the cloud • Pitfalls and mistakes other partners…

856 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question