Solved

Netgear DGN2200 - how to make the default gateway 192.168.0.254

Posted on 2014-11-03
1
785 Views
Last Modified: 2014-11-14
Part number DGN2200-100UKS
Is there a manual reference for this?

I changed the Routers IP address but Im wondering if that the right thing to do / way to do it.

It's a restaurant / pub set up ad the till don't seem to like the new router and spanner the www connection sometimes when connected to the router. The cameras are fine though.

I'm trying to match an old router config that had that address. By default it's 192.168.0.1

Thanks
0
Comment
Question by:feck1
1 Comment
 
LVL 27

Accepted Solution

by:
Predrag Jovic earned 500 total points
ID: 40421001
You just need to change router IP address to 192.168.0.254, router IP address is your gateway.

To change the LAN settings:
1. Select Advanced > LAN Setup   --- and change router IP address to 192.168.0.254
Manual - go to page 76
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Layer 2 versus layer 3 10 86
Reseller Hosting 2 88
UPS and BTU calculation 3 24
Patch panel 7 35
#Citrix #Citrix Netscaler #HTTP Compression #Load Balance
For many of us, the  holiday season kindles the natural urge to give back to our friends, family members and communities. While it's easy for friends to notice the impact of such deeds, understanding the contributions of businesses and enterprises i…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

786 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question