Solved

EMC VNX 5300 has 6 enclosures and adding a seventh one

Posted on 2014-11-04
2
212 Views
Last Modified: 2014-11-07
I have 6 enclosures, 3 on bus 0 and 3 on bus 1. I am adding a 7 one now and was wondering does it matter which bus I connect it to, either bus 0 or bus 1?
0
Comment
Question by:vmich
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 30

Accepted Solution

by:
Duncan Meyers earned 500 total points
ID: 40423279
Not really providing the workloads are reasonably well-balanced across the two back-end buses. If, for example, Bus 0 has a heap of SSDs on it and Bus 1 does not, I'd add the new DAE to Bus 1. If the SSD population is reasonably well balanced, I wouldn't get too concerned.

Incidentally, these are all 15 drive DAEs, yes?
0
 
LVL 1

Author Closing Comment

by:vmich
ID: 40429111
added to host 0
0

Featured Post

Complete VMware vSphere® ESX(i) & Hyper-V Backup

Capture your entire system, including the host, with patented disk imaging integrated with VMware VADP / Microsoft VSS and RCT. RTOs is as low as 15 seconds with Acronis Active Restore™. You can enjoy unlimited P2V/V2V migrations from any source (even from a different hypervisor)

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

In this article we will learn how to backup a VMware farm using Nakivo Backup & Replication. In this tutorial we will install the software on a Windows 2012 R2 Server.
Is your phone running out of space to hold pictures?  This article will show you quick tips on how to solve this problem.
This video teaches viewers how to encrypt an external drive that requires a password to read and edit the drive. All tasks are done in Disk Utility. Plug in the external drive you wish to encrypt: Make sure all previous data on the drive has been …
This tutorial will walk an individual through the process of installing the necessary services and then configuring a Windows Server 2012 system as an iSCSI target. To install the necessary roles, go to Server Manager, and select Add Roles and Featu…

696 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question