Solved

windows 2012 server gives error

Posted on 2014-11-09
19
43 Views
Last Modified: 2015-06-28
we have windows 2008 domain environment.  users unable to logon to terminal server windows 2012 with error :  the specified domain could not be contacted.
0
Comment
Question by:shashi patel
  • 6
  • 2
  • 2
  • +6
19 Comments
 
LVL 13

Expert Comment

by:Rizzle
ID: 40431241
Have you tried disjoining and rejoining the RDS server to the domain? Is the servers computer account in AD? Have the users got the correct rights to connect to the RDS server? Is the server physical or virtual? Have you ensured the server is connected to the network?
0
 

Expert Comment

by:Raneesh Ramanan
ID: 40431350
what was the exact error ? is it showing like this ?The specified domain either does not exist or could not be contacted.”

Could you please confirm the DNS is working fine
0
 

Author Comment

by:shashi patel
ID: 40431896
Have you tried disjoining and rejoining the RDS server to the domain? yes.
Is the servers computer account in AD? yes.
Have the users got the correct rights to connect to the RDS server? yes
 Is the server physical or virtual? physical
Have you ensured the server is connected to the network? yest
I run nslook up in RDS(terminal) server with dc name & ip & it gave correct results.
0
PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

 

Author Comment

by:shashi patel
ID: 40431898
pl. note i get this error while doing rdp to windows 2012  terminal server. Then after an hour or so, user can logon without any error & no  changes done by me during this time.
0
 

Author Comment

by:shashi patel
ID: 40432752
problem yet not resolved. i am getting following event ID s in event viewer.
1023,1054,46,5719,7023
0
 
LVL 38

Expert Comment

by:Philip Elder
ID: 40433298
Please paste an IPConfig /All
0
 
LVL 42

Expert Comment

by:Amit
ID: 40433322
Check system logs first, then application logs for error. Run GPO simulation wizard on this machine from  your DC and check what all GPO's are getting applied on this machine. Sometime OS corruption also causes this issue. You can run sfc /scannow in admin mode and check again.
0
 
LVL 19

Expert Comment

by:compdigit44
ID: 40433895
What network are using using please include the driver version..

Have you checked your switch for errors?
0
 
LVL 13

Expert Comment

by:Rizzle
ID: 40433900
Does this effect a specific server or all servers?
0
 

Author Comment

by:shashi patel
ID: 40434633
it affect 2 servers with windows 2012 servers.
GPO simulation wizard was successful.
again when this problem happened before some time, i removed its network cable from switch & reconnected. it started working.
0
 
LVL 27

Expert Comment

by:Steve
ID: 40434639
in most cases this is a dns issue. are there any events related to the DNS service on either the DC or on the RDP server?
are the users connecting with stored credentials? have you tried getting them to connect manually in case their stored credentials are the issue?

can you log onto the RDP server *while the issue is occurring* using a local account so you can confirm if it can see/ping the DNS/DC servers?
0
 
LVL 6

Expert Comment

by:Rob G
ID: 40435014
what happens if you log into the system using the domainname\username vs the drop down?
Put the Domain info into the host file and give it another shot.. see if that helps
does group policy have the setting checked to wait for the network before allowing logon?
0
 

Author Comment

by:shashi patel
ID: 40439255
are the users connecting with stored credentials? ..........yes
have you tried getting them to connect manually in case their stored credentials are the issue? .......yes tried but failed.

can you log onto the RDP server *while the issue is occurring* using a local account so you can confirm if it can see/ping the DNS/DC servers?............. yes can log on with localaaccount. can ping dc & dns server with 1 mS speed.
what happens if you log into the system using the domainname\username vs the drop down?...... results r same.
Put the Domain info into the host file and give it another shot.. see if that helps. done but did not work.
does group policy have the setting checked to wait for the network before allowing logon? there is no group policy implemented.
0
 
LVL 27

Expert Comment

by:Steve
ID: 40439552
can you log onto the RDP server *while the issue is occurring* using a local account so you can confirm if it can see/ping the DNS/DC servers?............. yes can log on with localaaccount. can ping dc & dns server with 1 mS speed.
Did you try an nslookup at all to confirm the domain resolves?

do you have more than one DNS set on the TS's NIC?
0
 
LVL 6

Expert Comment

by:Rob G
ID: 40440161
How many NIC's are on this server?
Are they teamed?
Make sure you only have one gateway on one NIC if there are more then one.

What is the server connected to?
Is the DC local, no firewall in the network, or separate VLANS?
Is the DC a full DC or a RODC?

You mentioned the DC is a 2k8 server?
What is the domain level?

is the DNS hosted off that server or an external source?
Is there an AV?
What is the AV?
Have you tried without the AV running?

The error you listed...
Is there an event ID that occurs with it?
Does this stop you from logging in, or does this error appear, and still allow login, (Cached)?

Are these servers physical or VM's?
if they are VM's what are they, hyper V or ESXI?
0
 

Accepted Solution

by:
shashi patel earned 0 total points
ID: 40472404
sorry i could not update status since was down with health issue. anyway, problem got resolved, it helped by adding entry of domain controller  in host file of windows 2012 server.
0
 
LVL 34

Expert Comment

by:Seth Simmons
ID: 40855317
This question has been classified as abandoned and is closed as part of the Cleanup Program. See the recommendation for more details.
0

Featured Post

NAS Cloud Backup Strategies

This article explains backup scenarios when using network storage. We review the so-called “3-2-1 strategy” and summarize the methods you can use to send NAS data to the cloud

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Every now and then, Microsoft does something that totally impresses me. It doesn't happen often, but in this case I must say I am thoroughly impressed with Windows Server Backup. One of the long time issues with Windows Backup has been the ability t…
Restoring deleted objects in Active Directory has been a standard feature in Active Directory for many years, yet some admins may not know what is available.
This tutorial will give a short introduction and overview of Backup Exec 2012 and how to navigate and perform basic functions. Click on the Backup Exec button in the upper left corner. From here, are global settings for the application such as conne…
This tutorial will walk an individual through the steps necessary to enable the VMware\Hyper-V licensed feature of Backup Exec 2012. In addition, how to add a VMware server and configure a backup job. The first step is to acquire the necessary licen…

820 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question