Solved

How to configure "secondary" route and dual homed RedHat host?

Posted on 2014-11-12
2
225 Views
Last Modified: 2014-11-12
Hello all,

I have a RH Linux box that is dual homed.  We have been all over the net trying to find out how to configure a static route for the second network.  All we are finding is how to set up the "default route" and that is not what we need.  We need to set a static, permanent route that says everything from a specific IP range goes out the second NIC.

Help?
0
Comment
Question by:yccdadmins
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 4

Accepted Solution

by:
mbertl earned 500 total points
ID: 40437710
This would look like this:

route add -net <source-ip-net> netmask <netmask> dev <second NIC>
0
 

Author Comment

by:yccdadmins
ID: 40437934
Thank you mbertl!
0

Featured Post

Free Tool: Port Scanner

Check which ports are open to the outside world. Helps make sure that your firewall rules are working as intended.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

I. Introduction There's an interesting discussion going on now in an Experts Exchange Group — Attachments with no extension (http://www.experts-exchange.com/discussions/210281/Attachments-with-no-extension.html). This reminded me of questions tha…
I was prompted to write this article after the recent World-Wide Ransomware outbreak. For years now, System Administrators around the world have used the excuse of "Waiting a Bit" before applying Security Patch Updates. This type of reasoning to me …
This tutorial will give a an overview on how to deploy remote agents in Backup Exec 2012 to new servers. Click on the Backup Exec button in the upper left corner. From here, are global settings for the application such as connecting to a remote Back…
This tutorial will walk an individual through the steps necessary to configure their installation of BackupExec 2012 to use network shared disk space. Verify that the path to the shared storage is valid and that data can be written to that location:…

734 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question