With Per VLAN STP, I make the root at the care. But for rstp, do I need to do the same? Is the process of selecting the root the same as STP? Is there any rstp best practice for a campus network? Thanks
Here is a link to simple articles I wrote about RSTP
I hope they'll help
This tutorial will go through the steps required to write a script that will back up the configuration settings of a HP-ProCurve switch.
You will need to get the following things to follow this tutorial:
Telnet Scripting Tool e.g. TST10.exe
AWS has developed and created its highly available global infrastructure allowing users to deploy and manage their estates all across the world through the use of the following geographical components
RegionsAvailability ZonesEdge Locations
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg).
If you're interested in additional methods for monitoring bandwidt…