Solved

Using Split Tunnel on Cisco ASA 5505 for Any Connect Clients

Posted on 2014-11-14
1
155 Views
Last Modified: 2015-02-19
My questions is, can we enable Split Tunnelling on Cisco ASA for only some AnyConnect users and not everyone. (There is only one DHCP pool defined on the ASA for all users).

My thoughts are......... if we can bind specific IP address from DHCP pool, to the specific MAC address, then may be there was a way of accomplishing what I'm try to do, But, I guess Cisco ASA does not support this ?

Regards
Adam
0
Comment
Question by:adam_kan2000
1 Comment
 
LVL 10

Accepted Solution

by:
rscottvan earned 500 total points
ID: 40445750
0

Featured Post

On Demand Webinar - Networking for the Cloud Era

This webinar discusses:
-Common barriers companies experience when moving to the cloud
-How SD-WAN changes the way we look at networks
-Best practices customers should employ moving forward with cloud migration
-What happens behind the scenes of SteelConnect’s one-click button

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

This article will cover setting up redundant ISPs for outbound connectivity on an ASA 5510 (although the same should work on the 5520s and up as well).  It’s important to note that this covers outbound connectivity only.  The ASA does not have built…
Secure VPN Connection terminated locally by the Client.  Reason 442: Failed to enable Virtual Adapter. If you receive this error on Windows 8 or Windows 8.1 while trying to connect with the Cisco VPN Client then the solution is a simple registry f…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

685 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question