Solved

switch config

Posted on 2014-11-18
1
116 Views
Last Modified: 2014-12-01
I have an HP procure switch that is about 6 years old.  I ordered a new Hp procure switch and am wondering some things about configuration.  I want this to be exactly like the old switch.  How would I go about configuring it to be the same?  I never changed out a switch before.  I have always had an outside company do it for us but I want to start doing these things myself.  Any steps to make this work correctly?
0
Comment
Question by:mkramer777
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 3

Accepted Solution

by:
markc56 earned 500 total points
ID: 40450837
I would begin by using a program like "putty" to copy the running-config to a file. Print this file out and you should be able to setup basic NEW switch configuration with this print out (IP address, VLANs, VLANs tagged and untagged, ip route, layer 3, default gateway, etc.) Everything you need should be in the running-config print out for the new switch.
0

Featured Post

Forrester Webinar: xMatters Delivers 261% ROI

Guest speaker Dean Davison, Forrester Principal Consultant, explains how a Fortune 500 communication company using xMatters found these results: Achieved a 261% ROI, Experienced $753,280 in net present value benefits over 3 years and Reduced MTTR by 91% for tier 1 incidents.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Cisco Supervisor upgrade to 2T 3 79
No RSTP between switches 3 71
ssh setup on Cisco swith 11 114
VLAN Question 13 61
The worst thing when starting a new job is when the previous Network Administrator left behind no documentation. How do you get into the devices? If you've been in this situation or just accidently mistyped your password, this article will hopefully…
Arrow Electronics was searching for a KVM  (Keyboard/Video/Mouse) switch that could display on one single monitor the current status of all units being tested on the rack.
Are you ready to implement Active Directory best practices without reading 300+ pages? You're in luck. In this webinar hosted by Skyport Systems, you gain insight into Microsoft's latest comprehensive guide, with tips on the best and easiest way…

730 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question