Solved

I am running NPS Radisus server for my DSL subscribers

Posted on 2014-11-21
7
192 Views
Last Modified: 2014-12-15
I can give my subscribers these DNS addresses by putting them there in my NPS
xxx
Is it possible to give some subscribers different ip addresses ?
0
Comment
Question by:soffcec
  • 4
  • 3
7 Comments
 
LVL 45

Expert Comment

by:Craig Beck
ID: 40459404
Absolutely.  You would need to create a different access rule for each set of DNS servers that you want to assign though, so you'd need something to make the rule match, such as security group membership, or which DSLAM they connect to as a condition in the rule.

Unfortunately there's no other way to selectively assign different addresses to each user if you're assigning DNS via AV-pairs.
0
 

Author Comment

by:soffcec
ID: 40459467
The DSLAM's are owned by third company also the LNS server so there is nothing I can do there.  I don't know where to start.
0
 
LVL 45

Expert Comment

by:Craig Beck
ID: 40459836
Do you have RADIUS clients listed in NPS?  You should have at least one.  If so, are they DSLAMs or LNS'?
0
DevOps Toolchain Recommendations

Read this Gartner Research Note and discover how your IT organization can automate and optimize DevOps processes using a toolchain architecture.

 

Author Comment

by:soffcec
ID: 40459933
Yes I have RADIUS Standard who is NAP capable and has ip address and shared secret.
0
 
LVL 45

Expert Comment

by:Craig Beck
ID: 40460047
So is that the LNS?
0
 

Author Comment

by:soffcec
ID: 40460163
My RADIUS is NPS Windows 2012R2 who talks to the LNS (Cisco)
0
 
LVL 45

Accepted Solution

by:
Craig Beck earned 500 total points
ID: 40460396
Ok so you cant do it based on NAS.

You could do it based on another variable such as time of day, for example.  It's a bit crude but it'll work.  Just copy the access profile to make 3 more identical rules and set a condition in each rule to match a different time period each day (12am - 6am, 6am - 12pm, 12pm - 6pm, 6pm - 12am), then set different DNS servers in each rule.
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In the hope of saving someone else's sanity... About a year ago we bought a Cisco 1921 router with two ADSL/VDSL EHWIC cards to load balance local network traffic over the two broadband lines we have, but we couldn't get the routing to work consi…
PRTG Network Monitor lets you monitor your bandwidth usage, so you know who is using up your bandwidth, and what they're using it for.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…

777 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question