Solved

configure Interface on Cisco ASA 5505

Posted on 2014-11-21
1
168 Views
Last Modified: 2014-11-27
I have assign x.x.x.120 to e0/1 as outside interface. I need to use different pubic IP address for setup Nat for exchange server like x.x.x.121 . I wonder if I need assign this IP address to e0/2 or I just need to add a IP address as a object.

When I try to assign this IP address to e0/2 , I am getting overlap error.

Please advise.
0
Comment
Question by:Golchehr
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 57

Accepted Solution

by:
Pete Long earned 500 total points
ID: 40459294
No, you just set up the nat, and the firewall will 'proxy arp' it outside of the existing outside interface (e0).

This is how to do it

Add a Static (One to One) NAT Translation to a Cisco ASA 5500 Firewall



PL
0

Featured Post

Building an interactive eFuture classroom

Watch and learn how ATEN provided a total control system solution including seamless switching matrix switch, HDBaseT extenders, PDU, lighting control to build an interactive eFuture classroom.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
CISCO ASA 5505 double Wan 8 50
Security considerations & assessment when enabling Cisco Wake-On-Lan 5 54
Cisco SRST questions 5 55
wifi security 11 45
In the hope of saving someone else's sanity... About a year ago we bought a Cisco 1921 router with two ADSL/VDSL EHWIC cards to load balance local network traffic over the two broadband lines we have, but we couldn't get the routing to work consi…
The Cisco RV042 router is a popular small network interfacing device that is often used as an internet gateway. Network administrators need to get at the management interface to make settings, change passwords, etc. This access is generally done usi…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

738 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question