How to setup firewall SSLVPN?

Posted on 2014-11-25
Last Modified: 2014-12-14
This is using Zyxel Zywall USG 100 firewall. The firewall is working fine. Now, get more and more users request to access to the office network from Internet for the navisions server. Check that this firewall support IPSEC, SSLVPN. BTW, how to setup SSLVPN to allow users to use the navisions server from home.

Thanks in advance.
Question by:MichaelBalack
  • 3

Accepted Solution

Network Zero earned 500 total points
ID: 40471114

Expert Comment

by:Network Zero
ID: 40471750
Zyxel Zywall USG 100 firewall.

There very little information on this device online from what I can see.

I posted a link on how to set up VPN from that device from an articule from David CSG on spiceworks

The document shows how to set up the device that he is trying to program

Author Closing Comment

ID: 40499559
Sorry for the delay.

SSLVPN is up now, thanks very much.

Expert Comment

by:Network Zero
ID: 40499632

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
IPSec Site to Site VPN Topology 6 42
Windows Server to Cisco switch connectivity 10 67
ASA5510 Blocking a Wanted Website/Host 9 24
what is mstp 6 28
If you're not part of the solution, you're part of the problem.   Tips on how to secure IoT devices, even the dumbest ones, so they can't be used as part of a DDoS botnet.  Use PRTG Network Monitor as one of the building blocks, to detect unusual…
When you try to share a printer , you may receive one of the following error messages. Error message when you use the Add Printer Wizard to share a printer: Windows could not share your printer. Operation could not be completed (Error 0x000006…
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

789 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question