Solved

vmware windows clusterdisk grow

Posted on 2014-11-25
4
55 Views
Last Modified: 2015-09-01
I'm looking for clear instructions to start my second node of a windows file cluster running within vmware 5.01

i've succesfully brought up the first node after growing a datadisk but the disk information on de config of node 2 displays the old disk configuration, Now i hesitate to bring up the second node as im afraid to crash the disk

the procedure i followed:
- powerdown node 2
- full chkdisk on the data disk in question (no issues)
- powerdown node 1
- grow the data disk eagerzeroed thick
- booted node 1
- extended the partition
- succesfully checked all data and such
- checked config of node 2, disk info is different

 
How to proceed to add the second node ?. can it be started or should i reattach the disks vmdk ?

Thanks
0
Comment
Question by:Mirjam Block
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
4 Comments
 
LVL 62

Accepted Solution

by:
gheist earned 500 total points
ID: 40465648
rescan in disk manager
0
 

Author Comment

by:Mirjam Block
ID: 40466327
It's Vmware VM config which is showing the wrong information not Windows.

i want to make sure the second node wont mess up my datadisk when i start the VM

Thanks anyway !
0
 

Author Closing Comment

by:Mirjam Block
ID: 40956297
Disk has to be rescanned, but i had trouble getting the correct vallue in the vmware center
0
 

Expert Comment

by:Roobenleo
ID: 40956625
,.,s
0

Featured Post

Free Tool: Port Scanner

Check which ports are open to the outside world. Helps make sure that your firewall rules are working as intended.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Will try to explain how to use the VMware feature TAGs in the VMs and create Veeam Backup Jobs using TAGs. Since this article is too long, I will create second article for the Veeam tasks.
In this article, I am going to show you how to simulate a multi-site Lab environment on a single Hyper-V host. I use this method successfully in my own lab to simulate three fully routed global AD Sites on a Windows 10 Hyper-V host.
This video teaches viewers how to encrypt an external drive that requires a password to read and edit the drive. All tasks are done in Disk Utility. Plug in the external drive you wish to encrypt: Make sure all previous data on the drive has been …
This tutorial will walk an individual through the process of installing the necessary services and then configuring a Windows Server 2012 system as an iSCSI target. To install the necessary roles, go to Server Manager, and select Add Roles and Featu…

730 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question