Solved

Server can not time Sync with TMG Server

Posted on 2014-11-25
3
193 Views
Last Modified: 2014-12-02
Hi All

          I have a TMG server located in DMZ network with subnet 192.168.81.x, and i could sync with external time server directly to this TMG Server (see the 1st screenshot below this is what our network infra look like), circle in red is the TMG server, and in the 10.141.101.x subnet network, all the client pc and dc located there, i would like the dc to sync time with the TMG server in DMZ, but i got problem (see screenshot2) it shows "Local CMOS Clock", and bottom screenshot is the rule from internal firewall ASA5510, i have NTP enabled in this rule, any idea why i cant sync time from the dc to the TMG server ?


Keith



 time sync2


time sync


ASA
0
Comment
Question by:piaakit
  • 2
3 Comments
 
LVL 24

Accepted Solution

by:
VB ITS earned 500 total points
ID: 40466598
Can't see an issue with the commands you ran. Does this DC hold the PDC Emulator role?

Try running w32tm /resync /nowait /rediscover then run w32tm /query /source

If it's still showing as Local CMOS Clock then run w32tm /query /configuration and paste the results here.
0
 

Author Comment

by:piaakit
ID: 40467079
the TMG server with ip 192.168.81.242 is not a DC server, and the Server that I ran this command is a DC server,





1
2
0
 

Author Comment

by:piaakit
ID: 40477968
it works now after i setup our NAT router become a time server
0

Featured Post

VMware Disaster Recovery and Data Protection

In this expert guide, you’ll learn about the components of a Modern Data Center. You will use cases for the value-added capabilities of Veeam®, including combining backup and replication for VMware disaster recovery and using replication for data center migration.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

To effectively work with Diskpart on a Server Core, it is necessary to write some small batch script's, because you can't execute diskpart in a remote powershell session. To get startet, place the Diskpart batch script's into a share on your loca…
Restoring deleted objects in Active Directory has been a standard feature in Active Directory for many years, yet some admins may not know what is available.
This tutorial will show how to push an installation of Backup Exec to an additional server in both 2012 and 2014 versions of the software. Click on the Backup Exec button in the upper left corner. From here, select Installation and Licensing, then I…
This tutorial will give a an overview on how to deploy remote agents in Backup Exec 2012 to new servers. Click on the Backup Exec button in the upper left corner. From here, are global settings for the application such as connecting to a remote Back…

778 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question