?
Solved

Ecologic an group ip an edit sport

Posted on 2014-12-04
1
Medium Priority
?
85 Views
Last Modified: 2014-12-09
i am new to ecologic and trying to undersand group Ip and its port.
Have a ps6000 and it has two ctrl.
Each has four ports.
In the initial configuration we give ip address to group.
There should be an either ports for this group ip. Where this ip assigned to , i mean which port?
0
Comment
Question by:sara2000
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 42

Accepted Solution

by:
kevinhsieh earned 2000 total points
ID: 40482293
The group IP isn't assigned to a single port. It is assigned to the group itself, and can be active on any port on any member of the group. Each interface on your controllers should have an IP on the same subnet as the group IP. You will have 5 IP addresses in total. The active and standby controllers use the same IP addresses per matching port as each port is only active on one controller at a time.
0

Featured Post

What does it mean to be "Always On"?

Is your cloud always on? With an Always On cloud you won't have to worry about downtime for maintenance or software application code updates, ensuring that your bottom line isn't affected.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Finding original email is quite difficult due to their duplicates. From this article, you will come to know why multiple duplicates of same emails appear and how to delete duplicate emails from Outlook securely and instantly while vital emails remai…
The business world is becoming increasingly integrated with tech. It’s not just for a select few anymore — but what about if you have a small business? It may be easier than you think to integrate technology into your small business, and it’s likely…
This video teaches viewers how to encrypt an external drive that requires a password to read and edit the drive. All tasks are done in Disk Utility. Plug in the external drive you wish to encrypt: Make sure all previous data on the drive has been …
This tutorial will walk an individual through the process of installing the necessary services and then configuring a Windows Server 2012 system as an iSCSI target. To install the necessary roles, go to Server Manager, and select Add Roles and Featu…
Suggested Courses
Course of the Month12 days, 4 hours left to enroll

752 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question