itsup23
asked on
Cisco Aironet 2700 - could not discover wlc using dhcp ip --cannot join wireless controller
Hello,
Just configured a cisco 2500 wireless controller, I have two wireless AP's and they cannot join to the network as they are giving the following error message
CAP-WAP-3-DHCP-RENEW: could not discover WLC using DHCP IP..Renewing DHCP IP
I Thought I followed all of the instructions but I must be missing something any thoughts??
Just configured a cisco 2500 wireless controller, I have two wireless AP's and they cannot join to the network as they are giving the following error message
CAP-WAP-3-DHCP-RENEW: could not discover WLC using DHCP IP..Renewing DHCP IP
I Thought I followed all of the instructions but I must be missing something any thoughts??
Last Comment
ASKER
ok, the AP is now getting an IP. It is broadcasting the SSID However I keep getting a 802.1x timeout or authentication error when trying to connect
Are you using RADIUS to authenticate users, or do you want to use a passphrase?
ASKER
passphrase. Do I need to configure the IEEE 802.1x in the controller?
ASKER CERTIFIED SOLUTION
THIS SOLUTION IS ONLY AVAILABLE TO MEMBERS.
View this solution by signing up for a free trial.
Members can start a 7-Day free trial and enjoy unlimited access to the platform.
Cisco
Cisco PIX is a dedicated hardware firewall appliance; the Cisco Adaptive Security Appliance (ASA) is a firewall and anti-malware security appliance that provides unified threat management and protection the PIX does not. Other Cisco devices and systems include routers, switches, storage networking, wireless and the software and hardware for PIX Firewall Manager (PFM), PIX Device Manager (PDM) and Adaptive Security Device Manager (ASDM).
27K
Questions
--
Followers
--
Top Experts
Get a personalized solution from industry experts
TRUSTED BY
If not you need to configure DHCP option 43 to tell the AP the IP of the WLC.