Solved

how to access netgear GS116 (Prosafe 16 ports gigabit switch) admin page

Posted on 2014-12-08
1
1,267 Views
Last Modified: 2014-12-17
Hi there,
I need to disable SIP ALG on my switcher for a Voip issue we are having. Apparently i can't get to the admin page of the switcher instead i get the router that is connected after the switcher. How do i get to the admin page and how do i disable SIP ALG on the switcher?
The connection goes like this:

Outside => ISP Modem => CISCO Router => Netgear GS116 Switcher => network

I have tried accessing http://192.168.1.1 but it does not bring anything up http://www.ehow.com/how_6753222_access-netgear-setup.html

Thanks for suggestions
0
Comment
Question by:COHFL
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 3

Accepted Solution

by:
Tuan Massey earned 500 total points
ID: 40487918
The GS116 Model is an unmanaged switch. It does not have a login interface, the switch is plug and play only.

You might need to buy a "managed" switch to do what needs to be done.

Your router might have the "SIP ALG" disable option
0

Featured Post

Is your NGFW recommended by NSS Labs?

Ours is! NSS Labs Next Generation Firewall Test gives the WatchGuard Firebox M4600 a "Recommended" rating! Curious where your NGFW landed on the  Security Value Map? See the map and download the full report today!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Quality of Service (QoS) options are nearly endless when it comes to networks today. This article is merely one example of how it can be handled in a hub-n-spoke design using a 3-tier configuration.
How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
NetCrunch network monitor is a highly extensive platform for network monitoring and alert generation. In this video you'll see a live demo of NetCrunch with most notable features explained in a walk-through manner. You'll also get to know the philos…

687 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question