Solved

How to trunk/Etherchannel Cisco 2960-XR and HP Procurve 4204vl

Posted on 2014-12-09
3
288 Views
Last Modified: 2014-12-30
I am trying to trunk 2 ports on the Cisco 2960 and the HP Procurve 4204 and wanted to know the best possible way to go about it.  Do I need to trunk both ports on both switches first, then plug in?  Is using cisco network assistant easier for the Cisco 2960?  Do I have to use CLI for the HP?

Any thoughts?
0
Comment
Question by:Witte3801
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
3 Comments
 
LVL 50

Expert Comment

by:Don Johnston
ID: 40490320
First you have to define "trunk".  The term means different things in Cisco and HP.

Are you wanting to send multiple VLANs over a link?  Or aggregate physical links together into a virtual link?
0
 

Author Comment

by:Witte3801
ID: 40494764
I am wanting to use an aggregate physical link together into a virtual link.
0
 
LVL 50

Accepted Solution

by:
Don Johnston earned 500 total points
ID: 40495063
Okay.

Cisco:
interface range g0/1 -2
 channel-group 1 mode active

HP:
trunk 16,18 trk1 lacp
0

Featured Post

Forrester Webinar: xMatters Delivers 261% ROI

Guest speaker Dean Davison, Forrester Principal Consultant, explains how a Fortune 500 communication company using xMatters found these results: Achieved a 261% ROI, Experienced $753,280 in net present value benefits over 3 years and Reduced MTTR by 91% for tier 1 incidents.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Outsource Your Fax Infrastructure to the Cloud (And come out looking like an IT Hero!) Relative to the many demands on today’s IT teams, spending capital, time and resources to maintain physical fax servers and infrastructure is not a high priority.
Microservice architecture adoption brings many advantages, but can add intricacy. Selecting the right orchestration tool is most important for business specific needs.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

740 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question