Solved

Ping Outside ASA firewall from Inside Network

Posted on 2014-12-10
3
238 Views
Last Modified: 2014-12-10
http://www.experts-exchange.com/Security/Software_Firewalls/Cisco_PIX_Firewall/Q_28576981.html

in the link above, I managed to get R1  to ping R2 loopback address 30.30.30.30
As you can see R1 has 2 interfaces in 2 different Networks 192.168.61.0 and 192.168.62.0.

However I have a computer in 192.168.61.0, that can ping ASA inside interface but not R2 interfaces.

If I issue ping from R1 with source 192.168.61.4  to R2 , it will not reach it  either.....so I need to resolve this before even trying to ping from the computer.

Any help will be very much appreciated.

Thanks

fr
0
Comment
Question by:jskfan
  • 2
3 Comments
 
LVL 17

Accepted Solution

by:
Spartan_1337 earned 500 total points
Comment Utility
How are you routing your traffic? Static routes? EIGRP? RIP?
If you run a traceroute from the PC, where does it fail? Does the ASA see those packets and what do the logs show?
0
 

Author Comment

by:jskfan
Comment Utility
Sorry, I should have deleted this Question, I forgot to do so.
Well when I configured the NAT it was for 192.168.2.0 , I have not included 192.168.1.0, so I changed NAT configuration to 192.168.0.0/16, so that it will include anything that starts with 192.168.x.x
0
 

Author Closing Comment

by:jskfan
Comment Utility
Thank you for responding!
0

Featured Post

IT, Stop Being Called Into Every Meeting

Highfive is so simple that setting up every meeting room takes just minutes and every employee will be able to start or join a call from any room with ease. Never be called into a meeting just to get it started again. This is how video conferencing should work!

Join & Write a Comment

I recently updated from an old PIX platform to the new ASA platform.  While upgrading, I was tremendously confused about how the VPN and AnyConnect licensing works.  It turns out that the ASA has 3 different VPN licensing schemes. "site-to-site" …
The Cisco RV042 router is a popular small network interfacing device that is often used as an internet gateway. Network administrators need to get at the management interface to make settings, change passwords, etc. This access is generally done usi…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

772 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

11 Experts available now in Live!

Get 1:1 Help Now