Solved

dfs not mapping

Posted on 2014-12-10
3
111 Views
Last Modified: 2014-12-11
I have a new DFS that is set up. I am able to get users to find it by using the run command and putting in \\domain.local\DFSname and it will come up. I am trying to map this because the DFS holds the home drives for each user. I had a DFS mapped using group policy and server 2003. I have the DFS on a 2012 R2 server and it is referencing a drive on a 2003 server. How do I map using the policy? i am using: \\domain.local\hdrives\%username%

I have seen some things that say use %netlogon% and have seen that a hot fix is needed?
0
Comment
Question by:geriatricgeek
  • 2
3 Comments
 
LVL 27

Accepted Solution

by:
Dan McFadden earned 500 total points
ID: 40493646
0
 
LVL 1

Author Comment

by:geriatricgeek
ID: 40494497
read the article. I can declare that the DFS is working as I wanted. Users can connect to it by going to the run command and going to \\domain\share and see the folders. They have the access to only their folder. Now the question becomes the mapping. It will not map. I have a general log on policy that maps drives and shortcuts but will not map this drive.
0
 
LVL 1

Author Closing Comment

by:geriatricgeek
ID: 40494500
I created a new step in the policy and now it works. it must have been an old sid that no longer worked.
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This article shows how to deploy dynamic backgrounds to computers depending on the aspect ratio of display
This article outlines the process to identify and resolve account lockout in an Active Directory environment.
This tutorial will walk an individual through the process of transferring the five major, necessary Active Directory Roles, commonly referred to as the FSMO roles from a Windows Server 2008 domain controller to a Windows Server 2012 domain controlle…
This tutorial will walk an individual through the process of installing of Data Protection Manager on a server running Windows Server 2012 R2, including the prerequisites. Microsoft .Net 3.5 is required. To install this feature, go to Server Manager…

832 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question