Want to win a PS4? Go Premium and enter to win our High-Tech Treats giveaway. Enter to Win

x
?
Solved

ASA 5505 configuration

Posted on 2014-12-12
8
Medium Priority
?
159 Views
Last Modified: 2014-12-30
hi all... I have an asa5505.  I am trying to configure it using cablemodem to use static ip.  which mac address should I give the isp?

thank you,
0
Comment
Question by:mwauki
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 4
  • 4
8 Comments
 
LVL 29

Expert Comment

by:Jan Springer
ID: 40497344
the mac address of the outside interface

sh int e0/0 | i MAC address
0
 

Author Comment

by:mwauki
ID: 40497348
thanks, Jan.  that is what I have the isp... this isp probly has cartoons working at their helpdesk...
0
 
LVL 29

Expert Comment

by:Jan Springer
ID: 40497916
oh my gosh, good luck.
0
Looking for the Wi-Fi vendor that's right for you?

We know how difficult it can be to evaluate Wi-Fi vendors, so we created this helpful Wi-Fi Buyer's Guide to help you find the Wi-Fi vendor that's right for your business! Download the guide and get started on our checklist today!

 

Author Comment

by:mwauki
ID: 40499889
now I was able to add the static ip but when I plug my laptop onto it, I can't access the internet.  it received an ip from the router's dhcp but I can't access the internet.  do I need to create a nat?  I read something that latest versions of asa ios come in blank hence new nat needed? anyone?
0
 
LVL 29

Expert Comment

by:Jan Springer
ID: 40500427
yes.  are you running 8.2 or earlier or are you running 8.3 or later?

the nat syntax differs between 8.2 and 8.3.
0
 

Author Comment

by:mwauki
ID: 40501353
8.3... do you happened to have the syntax? otherwise, i could google it.... thanks
0
 
LVL 29

Accepted Solution

by:
Jan Springer earned 2000 total points
ID: 40502693
this presumes that your local subnet is 192.168.1.0/24 (inside interface) and your public IP is 172.16.2.2 (outside interface):

object network INSIDE
 subnet 192.168.1.0 255.255.255.0

object-group network OUTSIDE
 network-object host 172.16.2.2            

nat (inside,outside) dynamic OUTSIDE
 object network INSIDE
0
 

Author Comment

by:mwauki
ID: 40504453
thanks, Jan.  let me give it a shot and see how it goes...
0

Featured Post

Independent Software Vendors: We Want Your Opinion

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In the hope of saving someone else's sanity... About a year ago we bought a Cisco 1921 router with two ADSL/VDSL EHWIC cards to load balance local network traffic over the two broadband lines we have, but we couldn't get the routing to work consi…
When you try to share a printer , you may receive one of the following error messages. Error message when you use the Add Printer Wizard to share a printer: Windows could not share your printer. Operation could not be completed (Error 0x000006…
Internet Business Fax to Email Made Easy - With  eFax Corporate (http://www.enterprise.efax.com), you'll receive a dedicated online fax number, which is used the same way as a typical analog fax number. You'll receive secure faxes in your email, f…
NetCrunch network monitor is a highly extensive platform for network monitoring and alert generation. In this video you'll see a live demo of NetCrunch with most notable features explained in a walk-through manner. You'll also get to know the philos…
Suggested Courses

650 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question