Solved

Installation of Cisco WCS software on Windows Server 2008, 2012 and Redhat 6 or later

Posted on 2014-12-14
2
600 Views
Last Modified: 2014-12-16
Hi Team,  

   We have new versions of Windows servers (2008, 2012) and would like to install the latest  (like version 7.0) or close to the latest versions of cisco wireless control systems on them.  We also run RHEL 6+.  The product wouldn't install and with google I  kept ending up with this link   -->
http://www.cisco.com/c/en/us/products/collateral/wireless/wireless-control-system/product_data_sheet0900aecd802570d0.html that shows that only windows 2003 is supported.

Unless I am missing something, we are a bit unimpressed that Cisco will not release WCS software running on the newer server OS versions.

 Has anyone had any luck with installations of WCS on new Windows and Linux server OSes?

thanks and regards,
0
Comment
Question by:rleyba828
2 Comments
 
LVL 45

Accepted Solution

by:
Craig Beck earned 500 total points
ID: 40499803
Cisco WCS stopped being WCS after v7.0.240.0 and became NCS, which is now Cisco Prime Infrastructure.  It runs as an appliance or as a VM in ESXi.  You can obtain a migration license from Cisco to get Prime Infrastructure but as I say, you'll need to buy an appliance for it or install the OVA on an ESXi box.
0
 

Author Comment

by:rleyba828
ID: 40503855
Hi Craig,
   Thanks very much for this info.
0

Featured Post

Windows Server 2016: All you need to know

Learn about Hyper-V features that increase functionality and usability of Microsoft Windows Server 2016. Also, throughout this eBook, you’ll find some basic PowerShell examples that will help you leverage the scripts in your environments!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

With the purchase of CloudCommand by Comcast customers are left in a bind as subscriptions expire and render the AP's disabled. The following will explain how to flash your Ubiquiti AP's with CloudCommand firmware back to Ubiquiti firmware. HOWTO…
This article is a step by step guide on how to create a basic PTP link using Ubiquiti airOS devices. This guide can be used on the following Ubiquiti AirMAX devices. Nanostation, Bullets, AirBridge, Nanobeam, NanoBridge to name a few. Please review …
This Micro Tutorial will show you how to maximize your wireless card to its maximum capability. This will be demonstrated using Intel(R) Centrino(R) Wireless-N 2230 wireless card on Windows 8 operating system.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…

776 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question