Solved

Confilcte ip after connecting VPN

Posted on 2014-12-16
2
125 Views
Last Modified: 2014-12-31
Hello,

I have problem after connecting to VPN I don't have ping to server, the problem is that I the IP I get from the router is: 192.168.1.x and the scope in the remote lan is the same 192.168.1.x ,when connecting to VPN there is no ping to the remote server, I think the ping is only internal.
If I take from ip that is not 192.168.1.x lets say 10.0.0.x, there is no problem to connect any server from VPN.

Any suggest how to fix it?
0
Comment
Question by:compx_it
  • 2
2 Comments
 
LVL 20

Accepted Solution

by:
n2fc earned 500 total points
ID: 40502134
You will need to alter the range of one of your networks.

Since the VPN may not be under your control, it is easier to change your own router...

The are a whole host of private IP addresses you can use.

10.0.0.0 - 10.255.255.255
172.16.0.0 - 172.31.255.255
192.168.0.0 - 192.168.255.255

The only other alternative you could risk if the specific IP addresses of the office machines you are trying to reach are not going to conflict with your local net would be to have more specific routes applied over the VPN - e.g. 192.168.1.241 netmask 255.255.255.255. This would work until your local router handed that IP out to your machine or you needed to talk to a machine on your local network with that address.
0
 
LVL 20

Expert Comment

by:n2fc
ID: 40513467
Any hope of testing this solution?
0

Featured Post

Connect further...control easier

With the ATEN CE624, you can now enjoy a high-quality visual experience powered by HDBaseT technology and the convenience of a single Cat6 cable to transmit uncompressed video with zero latency and multi-streaming for dual-view applications where remote access is required.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
DHCP and Internet Access Issue Cisco 4331 Router 9 43
ACL deny / Permit 10 21
Use packet tracer to verify anyconnect VPN 11 59
Updating Group Policy over a PPTP VPN 21 33
Configuring network clients can be a chore, especially if there are a large number of them or a lot of itinerant users.  DHCP dynamically manages this process, much to the relief of users and administrators alike!
How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
Viewers will learn how to properly install and use Secure Shell (SSH) to work on projects or homework remotely. Download Secure Shell: Follow basic installation instructions: Open Secure Shell and use "Quick Connect" to enter credentials includi…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

828 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question