Solved

Terminal services

Posted on 2014-12-25
11
89 Views
Last Modified: 2014-12-31
I have installed Terminal services on server 2012
The services and Remote Desktop Services connections are working fine

The question I have is:
How can I set things up so that when I use a Remote Desktop Client to access the Terminal server AND the server 2012 behind this
ie The terminal server on port 3389 and the server 2012 on 3390
0
Comment
Question by:doctorbill
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 6
  • 5
11 Comments
 
LVL 24

Assisted Solution

by:VB ITS
VB ITS earned 500 total points
ID: 40518021
Are you asking about accessing your Terminal Server and 2012 Server externally through these ports? If so then you need to set up port forwarding on your router.

Say in your scenario your Terminal Server is 192.168.0.10 and your 2012 Server is 192.168.0.20. On your firewall device you will need to set up two port forwarding rules, a direct forward for 3389 to your Terminal Server (192.168.0.10) and then another to forward 3390 externally to 3389 internally pointing to your 2012 Server (192.168.0.20).
0
 

Author Comment

by:doctorbill
ID: 40518026
No
What I am asking is if I set up a server 2012 as a terminal; server, can I still access the server 2012 behind the terminal server  in a separate Remote Desktop session or is that server just a terminal server
0
 
LVL 24

Assisted Solution

by:VB ITS
VB ITS earned 500 total points
ID: 40518037
Terminal Server (now known as Remote Desktop Services) is just a server role. You can still log into the server to do other tasks if needed. I wouldn't recommend installing other any roles though (e.g. DHCP, DNS, etc.) once you've got it set up for RDS.
0
Free eBook: Backup on AWS

Everything you need to know about backup and disaster recovery with AWS, for FREE!

 

Author Comment

by:doctorbill
ID: 40518211
Thats the point:
I can log on to the terminal server using a remote desktop services client, which is using port 3389
How do I log onto the backend server part (server 2012) with the same client
0
 
LVL 24

Assisted Solution

by:VB ITS
VB ITS earned 500 total points
ID: 40518394
You can still access the "backend server part" when you log in using port 3389. A "Terminal Server" is just a regular Windows Server running the Terminal Services role. This role is what allows multiple users to log in and run applications off it.

What is it that you're trying to achieve exactly here that's causing you to ask this question?
0
 

Author Comment

by:doctorbill
ID: 40518404
If I access using the RDS client I will get on to a particular profile using the TS
I want to be able to get into the server using RDS client as an administrator of the backend server to allow me to carry out admin functions
0
 
LVL 24

Assisted Solution

by:VB ITS
VB ITS earned 500 total points
ID: 40518415
If I access using the RDS client I will get on to a particular profile using the TS
So this happens when you currently log in with an Administrator account? If so, you need to look at what is applying these restrictions (be it Group Policy or some other method) and prevent them from applying to your admin account. Steps to do this for Group Policy can be found here: http://support.microsoft.com/kb/816100
0
 

Author Comment

by:doctorbill
ID: 40518450
Sorry - I think I am confusing the issue by not knowing what I am asking for
Does the server 2012 have the same IP address and computer name as the Terminal Server once the TS role has been established on the server 2012
0
 
LVL 24

Assisted Solution

by:VB ITS
VB ITS earned 500 total points
ID: 40518458
Does the server 2012 have the same IP address and computer name as the Terminal Server once the TS role has been established on the server 2012
Yes it does.
0
 

Accepted Solution

by:
doctorbill earned 0 total points
ID: 40518500
Thanks
sorry for the confusion
0
 

Author Closing Comment

by:doctorbill
ID: 40525160
solution
0

Featured Post

How our DevOps Teams Maximize Uptime

Our Dev teams are like yours. They’re continually cranking out code for new features/bugs fixes, testing, deploying, responding to production monitoring events and more. It’s complex. So, we thought you’d like to see what’s working for us. Read the use case whitepaper.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Recently, I was assigned the task of performing a hardware refresh in the datacenter. The previous Windows 2008 systems were connected to the SAN via fiber channel HBA’s and among other thing, had PowerPath installed in order to provide sufficient f…
The article will show you how you can maintain a simple logfile of all Startup and Shutdown events on Windows servers and desktops with PowerShell. The script can be easily adapted into doing more like gracefully silencing/updating your monitoring s…
In this Micro Tutorial viewers will learn how they can get their files copied out from their unbootable system without need to use recovery services. As an example non-bootable Windows 2012R2 installation is used which has boot problems.
In this Micro Tutorial viewers will learn how to use Boot Corrector from Paragon Rescue Kit Free to identify and fix the boot problems of Windows 7/8/2012R2 etc. As an example is used Windows 2012R2 which lost its active partition flag (often happen…

724 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question