Solved

vlans

Posted on 2014-12-26
1
218 Views
Last Modified: 2014-12-26
I am configuring a cisco 3550 inline power switch.  I am trying to configure ports 2 -24 to vlan 10 and 15.  When I put them in one vlan it takes them out of the other. How can I get them into both at the same time?
0
Comment
Question by:Jobeethemage
1 Comment
 
LVL 18

Accepted Solution

by:
Akinsd earned 500 total points
ID: 40518888
A switchport can only be in 1 VLAN at a time.
I'm guessing you're trying to configure then for LAN and VOIP.

Assuming 10 is your LAN and 15 is your VOIP

Switch(config)#int range fa0/2 - 24
Switch(config-if-range)#switchport mode access
Switch(config-if-range)#switchport access vlan 10
Switch(config-if-range)#switchport voice vlan 15

If however VOIP is not your reason for this. Then you'll have to make one VLAN your native vlan

Switch(config-if-range)#switchport native vlan 15
Any untagged traffic will be treated as belonging to vlan 15
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Join Greg Farro and Ethan Banks from Packet Pushers (http://packetpushers.net/podcast/podcasts/pq-show-93-smart-network-monitoring-paessler-sponsored/) and Greg Ross from Paessler (https://www.paessler.com/prtg) for a discussion about smart network …
If you're not part of the solution, you're part of the problem.   Tips on how to secure IoT devices, even the dumbest ones, so they can't be used as part of a DDoS botnet.  Use PRTG Network Monitor as one of the building blocks, to detect unusual…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…

919 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

17 Experts available now in Live!

Get 1:1 Help Now