Solved

nexus 7000 route redistribution

Posted on 2014-12-29
1
328 Views
Last Modified: 2014-12-29
Seeking examples of route redistribution using nx-os on the nexus 7K.   Specifically I am looking for protocol to protocol redistribution as I have info on static, connected and default route redistribution.

EIGRP TO OSPF or RIP to OSPF.

Thanks
0
Comment
Question by:sectel
1 Comment
 
LVL 50

Accepted Solution

by:
Don Johnston earned 500 total points
ID: 40522151
First thing to remember is that in NX-OS, route redistribution requires a route-map.

Other than that, it's (kind of) like in IOS.

ip prefix-list EGIRP-NETS seq 10 permit172.16.1.0/24 

route-map EIGRP-NETS permit 10
  match ip address prefix-list EIGRP-NETS

router ospf 1 
  redistribute EIGRP 1 route-map ALL-NETS

Open in new window

0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Cisco Router help 5 65
fibre channel switch - sfp needed? 2 37
CCNA lab 6 37
Unmanaged Switches for Optimized Network Speeds 7 39
I have seen some questions on problems with SSH/telnet access to Cisco routers that may occur despite the fact that from a PC connected to your LAN, Internet connectivity is in place and users can access Internet sites without any issues.  There are…
In the hope of saving someone else's sanity... About a year ago we bought a Cisco 1921 router with two ADSL/VDSL EHWIC cards to load balance local network traffic over the two broadband lines we have, but we couldn't get the routing to work consi…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

773 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question