Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people, just like you, are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
Solved

iscsiadm: cannot make connection to <IP>: No route to host

Posted on 2015-01-06
3
2,877 Views
Last Modified: 2015-01-06
I'm new to iSCSI configuration and may have missed something in configuration.  I have a target and initiator configured as follows:

target has single interface with IP  10.10.12.16
initiator has single interface with IP  10.10.12.20

[root@target ~]# targetcli ls
o- / ......................................................................................................................... [...]
  o- backstores .............................................................................................................. [...]
  | o- block .................................................................................................. [Storage Objects: 0]
  | o- fileio ................................................................................................. [Storage Objects: 1]
  | | o- disk01 .......................................................... [/iscsi_disks/disk01.img (880.0GiB) write-back activated]
  | o- pscsi .................................................................................................. [Storage Objects: 0]
  | o- ramdisk ................................................................................................ [Storage Objects: 0]
  o- iscsi ............................................................................................................ [Targets: 1]
  | o- iqn.2014-12.com.test:iscsi.target00 ..................................................................... [TPGs: 1]
  |   o- tpg1 ............................................................................................... [no-gen-acls, no-auth]
  |     o- acls .......................................................................................................... [ACLs: 1]
  |     | o- iqn.2014-12.com.test:iscsi ................................................................. [Mapped LUNs: 1]
  |     |   o- mapped_lun0 ............................................................................... [lun0 fileio/disk01 (rw)]
  |     o- luns .......................................................................................................... [LUNs: 1]
  |     | o- lun0 ........................................................................ [fileio/disk01 (/iscsi_disks/disk01.img)]
  |     o- portals .................................................................................................... [Portals: 1]
  |       o- 10.10.12.16:3260 ................................................................................................. [OK]
  o- loopback ......................................................................................................... [Targets: 0]

[root@target ~]# cat /etc/iscsi/initiatorname.iscsi
10.10.12.16:3260,1 iqn.2014-12.com.test:iscsi.target00

[root@target ~]# netstat -lnp | grep 3260
tcp        0      0 10.10.12.16:3260        0.0.0.0:*               LISTEN      -

[root@target ~]# iscsiadm -m node iqn.2014-12.com.test:iscsi.target00 -p 10.10.12.16
# BEGIN RECORD 6.2.0.873-21
node.name = iqn.2014-12.com.test:iscsi.target00
node.tpgt = 1
node.startup = automatic
node.leading_login = No
iface.hwaddress = <empty>
iface.ipaddress = <empty>
iface.iscsi_ifacename = default
iface.net_ifacename = <empty>
iface.transport_name = tcp
iface.initiatorname = <empty>
iface.state = <empty>
iface.vlan_id = 0
iface.vlan_priority = 0
iface.vlan_state = <empty>
iface.iface_num = 0
iface.mtu = 0
iface.port = 0
iface.bootproto = <empty>
iface.subnet_mask = <empty>
iface.gateway = <empty>
iface.dhcp_alt_client_id_state = <empty>
iface.dhcp_alt_client_id = <empty>
iface.dhcp_dns = <empty>
iface.dhcp_learn_iqn = <empty>
iface.dhcp_req_vendor_id_state = <empty>
iface.dhcp_vendor_id_state = <empty>
iface.dhcp_vendor_id = <empty>
iface.dhcp_slp_da = <empty>
iface.fragmentation = <empty>
iface.gratuitous_arp = <empty>
iface.incoming_forwarding = <empty>
iface.tos_state = <empty>
iface.tos = 0
iface.ttl = 0
iface.delayed_ack = <empty>
iface.tcp_nagle = <empty>
iface.tcp_wsf_state = <empty>
iface.tcp_wsf = 0
iface.tcp_timer_scale = 0
iface.tcp_timestamp = <empty>
iface.redirect = <empty>
iface.def_task_mgmt_timeout = 0
iface.header_digest = <empty>
iface.data_digest = <empty>
iface.immediate_data = <empty>
iface.initial_r2t = <empty>
iface.data_seq_inorder = <empty>
iface.data_pdu_inorder = <empty>
iface.erl = 0
iface.max_receive_data_len = 0
iface.first_burst_len = 0
iface.max_outstanding_r2t = 0
iface.max_burst_len = 0
iface.chap_auth = <empty>
iface.bidi_chap = <empty>
iface.strict_login_compliance = <empty>
iface.discovery_auth = <empty>
iface.discovery_logout = <empty>
node.discovery_address = 10.10.12.16
node.discovery_port = 3260
node.discovery_type = send_targets
node.session.initial_cmdsn = 0
node.session.initial_login_retry_max = 8
node.session.xmit_thread_priority = -20
node.session.cmds_max = 128
node.session.queue_depth = 32
node.session.nr_sessions = 1
node.session.auth.authmethod = None
node.session.auth.username = <empty>
node.session.auth.password = <empty>
node.session.auth.username_in = <empty>
node.session.auth.password_in = <empty>
node.session.timeo.replacement_timeout = 120
node.session.err_timeo.abort_timeout = 15
node.session.err_timeo.lu_reset_timeout = 30
node.session.err_timeo.tgt_reset_timeout = 30
node.session.err_timeo.host_reset_timeout = 60
node.session.iscsi.FastAbort = Yes
node.session.iscsi.InitialR2T = No
node.session.iscsi.ImmediateData = Yes
node.session.iscsi.FirstBurstLength = 262144
node.session.iscsi.MaxBurstLength = 16776192
node.session.iscsi.DefaultTime2Retain = 0
node.session.iscsi.DefaultTime2Wait = 2
node.session.iscsi.MaxConnections = 1
node.session.iscsi.MaxOutstandingR2T = 1
node.session.iscsi.ERL = 0
node.conn[0].address = 10.10.12.16
node.conn[0].port = 3260
node.conn[0].startup = manual
node.conn[0].tcp.window_size = 524288
node.conn[0].tcp.type_of_service = 0
node.conn[0].timeo.logout_timeout = 15
node.conn[0].timeo.login_timeout = 15
node.conn[0].timeo.auth_timeout = 45
node.conn[0].timeo.noop_out_interval = 5
node.conn[0].timeo.noop_out_timeout = 5
node.conn[0].iscsi.MaxXmitDataSegmentLength = 0
node.conn[0].iscsi.MaxRecvDataSegmentLength = 262144
node.conn[0].iscsi.HeaderDigest = None
node.conn[0].iscsi.IFMarker = No
node.conn[0].iscsi.OFMarker = No
# END RECORD


[root@target ~]# iscsiadm -m discovery -t sendtargets -p 10.10.12.16
10.10.12.16:3260,1 iqn.2014-12.com.test:iscsi.target00

[root@initiator ~]# iscsiadm -m discovery -t sendtargets -p 10.10.12.16
iscsiadm: cannot make connection to 10.10.12.16: No route to host

I can ping, ssh etc. from initiator to target.

I have opted not to configure CHAP.

Anyone know what I can do to progress.
0
Comment
Question by:mickt
  • 2
3 Comments
 
LVL 37

Accepted Solution

by:
Neil Russell earned 500 total points
ID: 40533144
What is the IP of the initiator?
Is there a firewall between the two? Possible its rejecting port :3260
0
 

Author Comment

by:mickt
ID: 40533159
Yes, damn iptables!

Reconfigured and it's fine.
iptables -D INPUT -j REJECT --reject-with icmp-host-prohibited
iptables -D FORWARD -j REJECT --reject-with icmp-host-prohibited
0
 
LVL 37

Expert Comment

by:Neil Russell
ID: 40533161
Caught me out many a time!
0

Featured Post

Free Tool: Subnet Calculator

The subnet calculator helps you design networks by taking an IP address and network mask and returning information such as network, broadcast address, and host range.

One of a set of tools we're offering as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Note: for this to work properly you need to use a Cross-Over network cable. 1. Connect both servers S1 and S2 on the second network slots respectively. Note that you can use the 1st slots but usually these would be occupied by the Service Provide…
This article aims to explain the working of CircularLogArchiver. This tool was designed to solve the buildup of log file in cases where systems do not support circular logging or where circular logging is not enabled
This tutorial will walk an individual through the process of installing the necessary services and then configuring a Windows Server 2012 system as an iSCSI target. To install the necessary roles, go to Server Manager, and select Add Roles and Featu…
This Micro Tutorial will teach you how to reformat your flash drive. Sometimes your flash drive may have issues carrying files so this will completely restore it to manufacturing settings. Make sure to backup all files before reformatting. This w…

791 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question