Solved

how to console to imb blade ps701/702 on blade center S model 8c6

Posted on 2015-01-08
9
221 Views
Last Modified: 2015-02-05
hi experts,

 I have a blade center S model 8c6 and in that center I have 5 blades. The model JS12 I can console because they have the console button I can just select but I don't know or can't figure out how to console into PS700 and the PS701 blade. I need to change the ip addresses on these two servers but need to be able to console into them. Any ideas please. attached is a picture.
ibmbladecenter.JPG
0
Comment
Question by:frankbustos
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 5
  • 4
9 Comments
 
LVL 62

Expert Comment

by:gheist
ID: 40539798
You must connect to enclosure management interface, propagate administrator account/password and IP settings to IMM modules of blades, then connect them.
0
 

Author Comment

by:frankbustos
ID: 40540924
gheist,
 I'm logged on to the IMB BladeCenter Management Module and in there I see:

monitors
blade tasks
I/O Module Tasks
Storage Tasks
MM Control
and Service Tools.

if I go to blade tasks and select remote control I can see blade1, blade2 and blade3 under KMV owner and under that there is Media Tray Onwer and in there I see blade 4 and blade 5 which are the ones I need to console too but I can't. if I select and click on start remote control another window comes up but nothing happens.

?
0
 
LVL 62

Accepted Solution

by:
gheist earned 500 total points
ID: 40541379
Please use web interface. It has more descriptive names and help texts.
Blade IMM IP is set in ermm blade tasks? What do you think?

Also get latest firmware updates from ibm fix central in shade of recent SSL vulnerabilities (for both CMM and IMM)
0
Edgartown IT Case Study

Learn about Edgartown's quest to ensure the safety and security of the entire town's employee and citizen data. Read the case study!

 

Author Comment

by:frankbustos
ID: 40541483
I am using the web interface
0
 
LVL 62

Expert Comment

by:gheist
ID: 40541488
in blade tasks you have admin password and IMM IP addressing. So assign them admin password and good IP configuration and connect.
Or if you use DHCP on same network assign static mappings for IMM MAC addresses.
0
 

Author Comment

by:frankbustos
ID: 40547274
hi gheist,

 I'm not seeing IMM IP Addresseing.
0
 
LVL 62

Expert Comment

by:gheist
ID: 40547449
I see IP and IPv6
0
 

Author Closing Comment

by:frankbustos
ID: 40591795
finally got to it,t hanks
0
 
LVL 62

Expert Comment

by:gheist
ID: 40592644
It is called "NODE IP ADDRESSING" in my CMM.
0

Featured Post

Free Tool: IP Lookup

Get more info about an IP address or domain name, such as organization, abuse contacts and geolocation.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Great sound, comfort and fit, excellent build quality, versatility, compatibility. These are just some of the many reasons for choosing a headset from Sennheiser.
Arrow Electronics was searching for a KVM  (Keyboard/Video/Mouse) switch that could display on one single monitor the current status of all units being tested on the rack.
In this brief tutorial Pawel from AdRem Software explains how you can quickly find out which services are running on your network, or what are the IP addresses of servers responsible for each service. Software used is freeware NetCrunch Tools (https…
This is my first video review of Microsoft Bookings, I will be doing a part two with a bit more information, but wanted to get this out to you folks.

695 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question