• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 1082
  • Last Modified:

TLS 1.0 on windows 2003

one of my clients is requesting to enable tls 1.0 on windows 2003 server on the iis server running on that machine.
I was told that something has to be done on the registry for this along with one other step.  Possible to get guidance on these steps?  Thanks.
3 Solutions
Imran Javed ZiaConsultant Software Engineer - .NET ArchitectCommented:
Radhakrishnan RSenior Technical LeadCommented:

If the TLS 1.0 only needs to be enable on the IIS server then you can enable it from the Internet Explorer. Open IE>>Tools>>Internet Options>>Advanced>>Bring the slide bar down till you get the Security section>>You can see "Use TLS 1.0 here, put a tick mark on it and Apply and OK.

Close the browser, this will take effect after restarting IE.

Hope this helps.
dankyle67Author Commented:
I was told by the people handling the ecommerce integration that on a 2003 server, tls must be enabled using registry.  The article above is useful for disabling tls but need the instructions on how to enable it in registry, thanks.
TLS 1.0 is enabled unless it is disabled in the registry. If you don't see it disabled, it is enabled. You should have SSL 2, PCT 1.1, disabled, and you should be moving towards disabling SSL 3.0. SSL 3 is no longer considered secure and it being removed from browsers and operating systems.
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

Join & Write a Comment

Featured Post

Free Tool: Subnet Calculator

The subnet calculator helps you design networks by taking an IP address and network mask and returning information such as network, broadcast address, and host range.

One of a set of tools we're offering as a way of saying thank you for being a part of the community.

Tackle projects and never again get stuck behind a technical roadblock.
Join Now