Solved

Hi All, how do you setup network_objects to access an internal website which sits behind an ASA5505?

Posted on 2015-01-22
3
61 Views
Last Modified: 2015-04-16
here is my scenario:

I have an asa5505
one static external ip, 4 vpns site-to-sites tunnels,  
how do you make the 4 tunnels to access one internal website behind the asa5505?
0
Comment
Question by:mwauki
  • 2
3 Comments
 
LVL 11

Accepted Solution

by:
naderz earned 500 total points
ID: 40568862
You can have the internal web site address defined as the "interesting" traffic that establishes the VPN tunnel. In your site-to-site VPN definitions you have defined the external site address and internal site addresses. Make sure the web site address is included in all the internal addresses. And, on the other side you have to make sure they match the same addresses.
0
 

Author Comment

by:mwauki
ID: 40578480
thanks Naderz... will give it a shut and advise
0
 

Author Closing Comment

by:mwauki
ID: 40728634
thanks much for the advise
0

Featured Post

Scale it in WD Gold

With up to ten times the workload capacity of desktop drives, WD Gold hard drives employ advanced technology to deliver among the best in reliability, capacity, power efficiency and performance.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In the hope of saving someone else's sanity... About a year ago we bought a Cisco 1921 router with two ADSL/VDSL EHWIC cards to load balance local network traffic over the two broadband lines we have, but we couldn't get the routing to work consi…
Quality of Service (QoS) options are nearly endless when it comes to networks today. This article is merely one example of how it can be handled in a hub-n-spoke design using a 3-tier configuration.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

863 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

26 Experts available now in Live!

Get 1:1 Help Now