Solved

Setup Draytek 2830n to receive DMZ traffic from BT BUsiness Hub 5

Posted on 2015-01-25
1
689 Views
Last Modified: 2015-02-26
Hi, i have a BT Business Hub setup for DMZ - it is forwarding all traffic to the Draytek router.
I cant seem to get internet working through this setup to the clients though.
On the Draytek in the WAN section, under General Setup i have WAN 2 enabled (thats the port the BT box is plugged into), under the Internet Access section, WAN2 is set to Ethernet and enabled but this is where I am not sure what i need to put in. I have options for 'enable ping to keep alive', 'WAN connection detection (currently set to ARP detect), WAN IP alias, specify an IP address and DNS server IP address.
I havent filled any of these in, apart from 'Obtain IP address automatically' which I thought would do it but it doesnt.
If I go to the Online Status section, WAN2 is in green and showing packets sent and received but no IP address details.
If anyone has setup a similar configuration and could give me any help, it would be gratefully received.
Thanks
Andy
0
Comment
Question by:activateahsd
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 19

Accepted Solution

by:
Kash earned 500 total points
ID: 40568935
should not be difficult.

first make sure you are getting internet on the BT box. If yes then proceed on to login to BT box and disable DHCP on it and make note of IP adderss. so lets presume the IP is of BT box is set to:

192.168.1.1
255.255.255.0
192.168.1.254
DNS: 8.8.8.

plug the cable from BT into WAN2 of the DRAYTEK and assign the draytek the following IP

192.168.1.2
255.255.255.0
192.168.1.1 <<< gateway is the IP of BT box

make sure draytek is set to different IP range for LAN and run DHCP on it.
You should be able to get internet through draytek now.



if that don't work, I have had a similar setup with virgin media business.
with VM Business, they gave you a static external IP which you have to in put the hub in business broadband area, This is the external IP address you put in and then on your draytek you link them up and assign the external IP to the interface on the draytek with the gateway pointing to VM Hub and it works.

hope this helps
0

Featured Post

MIM Survival Guide for Service Desk Managers

Major incidents can send mastered service desk processes into disorder. Systems and tools produce the data needed to resolve these incidents, but your challenge is getting that information to the right people fast. Check out the Survival Guide and begin bringing order to chaos.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
In this article, I am going to show you how to simulate a multi-site Lab environment on a single Hyper-V host. I use this method successfully in my own lab to simulate three fully routed global AD Sites on a Windows 10 Hyper-V host.
NetCrunch network monitor is a highly extensive platform for network monitoring and alert generation. In this video you'll see a live demo of NetCrunch with most notable features explained in a walk-through manner. You'll also get to know the philos…
Michael from AdRem Software outlines event notifications and Automatic Corrective Actions in network monitoring. Automatic Corrective Actions are scripts, which can automatically run upon discovery of a certain undesirable condition in your network.…

726 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question