Solved

Asterick 13 software install

Posted on 2015-01-28
13
340 Views
Last Modified: 2015-02-05
I am installing Asterick 13 on Red Hat Enterprise Linux 2.6.32-431.23.3 on a CLOSED network.
So far I have unzipped and tarred the software. I run ./configure and generates the error below.
What causes this?
 [root@server ~]# cd /usr/local/src
[root@server src]# tar -zxvf asterisk-13-current.tar.gz

[root@server src]# cd /usr/local/src/ asterisk-13.1.0
[root@server asterisk-11.X.Y]# ./configure
Configure error: *** uuid support not found (this typically means the uuid development package is missing)
0
Comment
Question by:gumball60
  • 7
  • 6
13 Comments
 
LVL 61

Expert Comment

by:gheist
ID: 40576123
Chuck the speling...

Add epel repository and install asterisk...
0
 

Author Comment

by:gumball60
ID: 40577095
I ran contrib/scripts/install-prereq install
(These packages below where unavailable)  I have a host that is NOT connected to the internet,
I have another/separate  system that connects to the internet......WHERE can I download these files?
Spansp-devel
Freetds-devel
Iksemel-devel
Libsqlite3x-devel
Portaudio-devel
Libresample-devel
Gmime22-devel
Jack-audio-connection-kit-devel
Jansson-devel
Libsrtp-devel
Pjproject-devel
0
 
LVL 61

Expert Comment

by:gheist
ID: 40577301
Configure EPEL repository and install asterisk without turning your machine in a build barn.
0
 

Author Comment

by:gumball60
ID: 40578256
Got Asterisk installed... I have two text files for Asterisk. Now trying to find where to placethe sip.conf and entension.conf files.
How/where do configure Asterisk with pre-set configuration files (Sip.con and entension.conf)
0
 
LVL 61

Expert Comment

by:gheist
ID: 40578365
Most likely in /etc/asterisk...
man whatever.conf
should more or less describe the file and format.
0
 

Author Comment

by:gumball60
ID: 40578762
one last question....When I run /etc/init.d/asterisk status ....I receive this  error....Asterisk dead but subsys locked
I have /etc/init.d/asterisk stop and started with no success.
I have google this and have found no solution,,,any ideas?
0
Ransomware-A Revenue Bonanza for Service Providers

Ransomware – malware that gets on your customers’ computers, encrypts their data, and extorts a hefty ransom for the decryption keys – is a surging new threat.  The purpose of this eBook is to educate the reader about ransomware attacks.

 
LVL 61

Expert Comment

by:gheist
ID: 40578766
it should tell something in /var/log/asterisk*
0
 

Author Comment

by:gumball60
ID: 40580134
nothing obvious in the /var/log/messages on asterisk server.
 It is giving me this error  /etc/init.d/asterisk status ......Asterisk dead but subsys locked

anything in particular that I should look for,  there are indications of failure or trouble in the logs?
0
 
LVL 61

Expert Comment

by:gheist
ID: 40580325
remove /var/lock/subsys/asterisk
then try again
0
 

Author Comment

by:gumball60
ID: 40581791
I will try this on Monday.....Has anyone resolved successfully "Asterisk dead but subsys locked"?  

I have seen a lot internet communications about this system failure, but no one mentioned that they succeeded. I have unsuccessfully tried many of those attempts...just curious.
0
 
LVL 61

Accepted Solution

by:
gheist earned 500 total points
ID: 40582157
Yes, delete subsystem lock and start it...
0
 

Author Comment

by:gumball60
ID: 40591750
It worked!
0
 
LVL 61

Expert Comment

by:gheist
ID: 40592645
Learn to use init.d scripts and service. "kill" leaves them out of sync.
0

Featured Post

Microsoft Certification Exam 74-409

Veeam® is happy to provide the Microsoft community with a study guide prepared by MVP and MCT, Orin Thomas. This guide will take you through each of the exam objectives, helping you to prepare for and pass the examination.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

1. Introduction As many people are interested in Linux but not as many are interested or knowledgeable (enough) to install Linux on their system, here is a safe way to try out Linux on your existing (Windows) system. The idea is that you insta…
Join Greg Farro and Ethan Banks from Packet Pushers (http://packetpushers.net/podcast/podcasts/pq-show-93-smart-network-monitoring-paessler-sponsored/) and Greg Ross from Paessler (https://www.paessler.com/prtg) for a discussion about smart network …
Learn how to get help with Linux/Unix bash shell commands. Use help to read help documents for built in bash shell commands.: Use man to interface with the online reference manuals for shell commands.: Use man to search man pages for unknown command…
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.

919 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

14 Experts available now in Live!

Get 1:1 Help Now