Solved

Cisco ASA and SNMP

Posted on 2015-01-30
3
168 Views
Last Modified: 2015-02-04
I have this statement snmp-server host Internal 192.168.10.13 community my-snmp-string on my ASA 5500X series and my collector can't still see snmp coming from the ASA. How do I check to see if the ASA is blocking? If it is blocking, how do I allow snmp going to my collector 192.168.10.13? Thx
0
Comment
Question by:leblanc
  • 2
3 Comments
 
LVL 3

Expert Comment

by:Stephen Berk
ID: 40581115
Don't forget to enable traps (snmp-server enable traps _____ <--fill in what traps you want sent, e.g, all, syslog, etc.) if you are trying to send snmp data somewhere, and also confirm you have matching community strings on both the asa and the collector.
0
 
LVL 1

Author Comment

by:leblanc
ID: 40581859
Sure but how do I check to see if the ASA is blocking? If it is blocking, how do I allow snmp going to my collector 192.168.10.13?
0
 
LVL 3

Accepted Solution

by:
Stephen Berk earned 500 total points
ID: 40582511
There's some good tips in this doc that show how to verify the SNMP process is running, gathering server stats, and looking for mishandled packets: http://goo.gl/QEw66p
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Hybrid WAN vs SD WAN 4 51
Is it possible to host a website on a windows vps 4 57
PCI compliance 16 32
E-mail delayed during DNS server reboot 8 37
Short answer to this question: there is no effective WiFi manager in iOS devices as seen in Windows WiFi or Macbook OSx WiFi management, but this article will try and provide some amicable solutions to better suite your needs.
How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…

770 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question