Solved

asus ac router delivers half isp speed

Posted on 2015-02-01
7
149 Views
Last Modified: 2015-02-06
Asus ac router (RT 87R) only gets half the speed of an optimum ultra 101 service?
0
Comment
Question by:fbfmd
  • 4
  • 2
7 Comments
 
LVL 9

Expert Comment

by:Benjamin MOREAU
ID: 40582442
Could you test your internet speed if you directly connect your computer to the network cable of your "Internet provider router" ? (without your Asus router).

You give few information to solve your problem... Maybe it's a problem with your computer, your router or your ISP connection.

As your router is a gigabit router, i think the problem is on your computer or with your ISP.
0
 

Author Comment

by:fbfmd
ID: 40582473
Connected to the Modem directly - full speed. My previous "N" class delivered full speed. Since there are many such reports I wondered if there were settings in the router and/or computer which might help?
0
 
LVL 3

Expert Comment

by:Stephen Berk
ID: 40582475
Optimum's actual speeds may vary and are not guaranteed, as their website states. You may have everything working as expected, but its worth trying Benjamin Moreau's idea of bypassing the router and connecting your pc directly to the ISP modem to see if you get the same or higher speed. And since they offer a service at 50 Mbps, you might want to call them to make sure they configured your service for the correct speed.

EDIT: Sorry, looks like we were posting at the same time. Nevermind my comments.
0
Efficient way to get backups off site to Azure

This user guide provides instructions on how to deploy and configure both a StoneFly Scale Out NAS Enterprise Cloud Drive virtual machine and Veeam Cloud Connect in the Microsoft Azure Cloud.

 
LVL 9

Expert Comment

by:Benjamin MOREAU
ID: 40582480
ANd if you test again behind your Router; is the bandwith correct ? As Stepen says, maybe the bandwith is not always @100 Mbits...

Try to check 5/6 times at different moment of the days.

Have you some "security services" activated on your Router (like Antivirus, IDS, etc...) ?
0
 

Author Comment

by:fbfmd
ID: 40582543
The service has been tested at many different times - always ramps right up to 50mb/s. The isp showed me I was getting 100 mb/s at the WAN. If I disable the router's firewall - same result, except that monitoring traffic thru the router on the wired connections improves - to the equivalent in kB/s of 50 mb/s.
0
 

Accepted Solution

by:
fbfmd earned 0 total points
ID: 40582576
Firewall back on, and tweaking some changes in the router firmware - particularly in QoS - and speeds are now anywhere from 98 to 117 mb/s. I don't know which settings made it right. Sorry. But thanks for your help.
0
 

Author Closing Comment

by:fbfmd
ID: 40593223
It Works
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Comparing Internet speeds via throughput 3 33
ftp using powershell 11 49
Link issue 11 50
Auto Smartport macro for Dell and HP laptops 2 44
The article explains the protocols and technology which is involved when two computers on different TCP/IP networks communicate with each other. In the diagram, a router is used to segregate two networks. The networks are 192.168.1.0/24 and 192…
A common practice in small networks is making file sharing easy which works extremely well when intra-network security is not an issue. In essence, everyone, that is "Everyone", is given access to all of the shared files - often the entire C: drive …
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

948 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

23 Experts available now in Live!

Get 1:1 Help Now