Solved

Remote Performance Monitor "The parameter is incorrect"

Posted on 2015-02-01
5
1,118 Views
Last Modified: 2015-02-13
hi,

From my windows server 2008 r2 I'm try to remotely connect using perfmon to a windows server 2012 r2 datacenter box.  Both are on the same network and I've turned off the windows firewall of the 2012 r2 machine.  After finding the computer in the network list and clicking ok it comes up with "the parameter is incorrect".  I've attached a screenshot.
perfmon.PNG
0
Comment
Question by:ts11
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
5 Comments
 
LVL 58

Expert Comment

by:Cliff Galiher
ID: 40583230
Simple limitation of monitoring a newer OS wihpth an older tool. 2012 R2 is returning data that the 2008 R2 tool doesn't know what to do with. You'll need to monitor locally or from another 2012 R2/8.1 machine.
0
 

Author Comment

by:ts11
ID: 40583340
I just tried the same thing from a server running 2008 r2 to a serve running 2008 r2 and I'm getting the same error...
0
 
LVL 32

Expert Comment

by:Kamran Arshad
ID: 40593321
0
 

Accepted Solution

by:
ts11 earned 0 total points
ID: 40597239
For the same OS monitoring, I was able to get it working my enabling network discovery.
0
 

Author Closing Comment

by:ts11
ID: 40607548
it's what worked for me.
0

Featured Post

Major Incident Management Communications

Major incidents and IT service outages cost companies millions. Often the solution to minimizing damage is automated communication. Find out more in our Major Incident Management Communications infographic.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

A safe way to clean winsxs folder from your windows server 2008 R2 editions
WARNING:   If you follow the instructions here, you will wipe out your VTP and VLAN configurations.  Make sure you have backed up your switch!!! I recently had some issues with a few low-end Cisco routers (RV325) and I opened a case with Cisco TA…
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
Monitoring a network: why having a policy is the best policy? Michael Kulchisky, MCSE, MCSA, MCP, VTSP, VSP, CCSP outlines the enormous benefits of having a policy-based approach when monitoring medium and large networks. Software utilized in this v…

688 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question