Solved

cannot get 3rd virtual server to connect to internet or ping router

Posted on 2015-02-03
2
84 Views
Last Modified: 2015-02-09
hi, I have a windows 2012 hyper-v setup, running 3 windows 2012 VS's.
I have 2 of the VS's connecting to the internet, yet a 3rd VS cannot ping the router or external IP. All 3 use the same virtual switch and all run on one network cable for the moment.
the 3rd VS can ping other internal IP's, but cannot ping the router. The router is a watchguard XTM-26 and has no limits that i know of.

Is there some thing stupid like a limit of only 2 VS's to the virtual switch ?
0
Comment
Question by:total123
2 Comments
 
LVL 56

Accepted Solution

by:
Cliff Galiher earned 500 total points
ID: 40587327
No, there are no artificial limits like that. Traditional network troubleshooting applies here. wireshark, any logging you can turn on with physical devices... follow the packets.
0
 

Author Closing Comment

by:total123
ID: 40598053
HI, we couldn't determining the errors we were getting and diagnose the issue, we ended up deleteing the vhd and rebuilding it. that worked. just under a bit of time pressure.

thanks for the help.
0

Featured Post

Highfive + Dolby Voice = No More Audio Complaints!

Poor audio quality is one of the top reasons people don’t use video conferencing. Get the crispest, clearest audio powered by Dolby Voice in every meeting. Highfive and Dolby Voice deliver the best video conferencing and audio experience for every meeting and every room.

Join & Write a Comment

Suggested Solutions

I don't know if many of you have made the great mistake of using the Cisco Thin Client model with the management software VXC. If you have then you are probably more then familiar with the incredibly clunky interface, the numerous work arounds, and …
First I will try to share a design of a Veeam Backup Infrastructure without Direct NFS Access backup. Note: Direct NFS Access backup transport mechanism is only available in Veeam v9 In above I try to design the Veeam Backup flow between i…
In this Micro Tutorial viewers will learn how they can get their files copied out from their unbootable system without need to use recovery services. As an example non-bootable Windows 2012R2 installation is used which has boot problems.
This tutorial will walk an individual through the process of configuring basic necessities in order to use the 2010 version of Data Protection Manager. These include storage, agents, and protection jobs. Launch Data Protection Manager from the deskt…

743 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

12 Experts available now in Live!

Get 1:1 Help Now