Solved

SNMP packet sent status

Posted on 2015-02-04
5
139 Views
Last Modified: 2015-02-16
My ASA has been configured with several snmp collectors. one of the collector does not seem to work. Is there a command to check if the snmp packets have been sent for that specific collector? Thx
0
Comment
Question by:leblanc
  • 3
  • 2
5 Comments
 
LVL 32

Assisted Solution

by:Kamran Arshad
Kamran Arshad earned 500 total points
ID: 40590380
Hi,

You can use SNMP Informant;

http://www.wtcs.org/informant/getif.htm

For general diagnosis of networks, Wireshark is the best tool;

www.wireshark.org
0
 
LVL 1

Author Comment

by:leblanc
ID: 40591522
Is it possible to see it from within the ASA with a command?
0
 
LVL 32

Expert Comment

by:Kamran Arshad
ID: 40591531
Since other collectors are receiving the snmp so it means ASA is working fine...what collector is having issue?
0
 
LVL 1

Author Comment

by:leblanc
ID: 40592166
I have this command "snmp-server host Internal 192.168.100.13 community mystring" like the other snmp statement for the other collector.  My collector does not see any snmp traffic. I did a show command that show snmp packets. But it is for all the packets sending out. I'd like to know if there is a command that show the snmp packets only for 192.168.100.13. Thx
0
 
LVL 32

Accepted Solution

by:
Kamran Arshad earned 500 total points
ID: 40593177
Thanks for the update. I doubt it is possible the way you are trying to do. However using wireshark and placing it next to ASA will show if packets are sent to the specific collector at 192.168.100.13.

I personally think that on the collector at 192.168.100.13, something is blocking the snmp traffic. Possibly it could be the windows firewall incase its active or may be AV. Incase it some linux device then may be iptables.
0

Featured Post

Back Up Your Microsoft Windows Server®

Back up all your Microsoft Windows Server – on-premises, in remote locations, in private and hybrid clouds. Your entire Windows Server will be backed up in one easy step with patented, block-level disk imaging. We achieve RTOs (recovery time objectives) as low as 15 seconds.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Launching a report from a Sharepoint webpage is slow. 2 24
evulating CPU from family/model/stepping #s 6 46
Supermicro 91 error 8 61
Nifty tent 7 50
Arrow Electronics was searching for a KVM  (Keyboard/Video/Mouse) switch that could display on one single monitor the current status of all units being tested on the rack.
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…

763 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question