Solved

Cisco Call Manager Express - Dial Peer

Posted on 2015-02-13
2
284 Views
Last Modified: 2015-02-21
Hi All,

Hope everyone is well?

I have a small problem with Dial Peers on Cisco Call Manager Express which i hope somebody could help with?

Currently we have a simple Dial Peer Setup as follows:-

dial-peer voice 21 pots
 description ** Outbound Calls **
 translation-profile outgoing OutgoingDID
 destination-pattern 9T
 direct-inward-dial
 port 0/0/0:15

This works fine for all calls. We now want to lock down some of the phones to disallow international call. We are going to do this using COR.

I have setup some new Dial Peers (Were based in the UAE):-

dial-peer voice 21 pots
 description ** Outbound Emergancy Calls **
 destination-pattern 9...
 translation-profile outgoing OutgoingDID
 direct-inward-dial
 port 0/0/0:15
!
dial-peer voice 22 pots
 description ** Outbound Local **
 destination-pattern 90[2-8][0-9][1-9]....
 translation-profile outgoing OutgoingDID
 direct-inward-dial
 port 0/0/0:15
!
dial-peer voice 23 pots
 description ** Outbound Mobile **
 destination-pattern 905........
 translation-profile outgoing OutgoingDID
 direct-inward-dial
 port 0/0/0:15
!
dial-peer voice 24 pots
 description ** Outbound National **
 destination-pattern 90[234679].......
 translation-profile outgoing OutgoingDID
 direct-inward-dial
 port 0/0/0:15
!
dial-peer voice 25 pots
 description ** Outbound International **
 destination-pattern 900T
 translation-profile outgoing OutgoingDID
 direct-inward-dial
 port 0/0/0:15
!
dial-peer voice 26 pots
 description ** Outbound 600 Calls **
 destination-pattern 9600T
 translation-profile outgoing OutgoingDID
 direct-inward-dial
 port 0/0/0:15
!
dial-peer voice 27 pots
 description ** Outbound 800 Calls **
 destination-pattern 9800T
 translation-profile outgoing OutgoingDID
 direct-inward-dial
 port 0/0/0:15
!
!
!
!

My problem is when we add these and try and dial only the first 4 diagits dial.

For example is if i dial:-

9,0501234567 it only dials 9050
9,024101234 it only dials 9020

Could anybody tell me where im going wrong or point me in the right direction?

For information UAE Dial Codes are set as follows:-

01 xxx xxxx to 04 xxx xxxx
05 xxx xxxx
06 xxx xxxx to 09 xxx xxxx
600 xxxx
600 xxx xxxx
800 xxxx
800 xxx xxxx
900 xxxx
900 xxx xxxx

And then all International calls are 00 x

Cheers
TME
0
Comment
Question by:TrustGroup-UAE
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 79

Accepted Solution

by:
lrmoore earned 500 total points
ID: 40611197
Try shutting down dialpeer 21 and testing again.
What is the emergency services number?
0
 
LVL 1

Author Comment

by:TrustGroup-UAE
ID: 40623858
Hi,

After some further reading the Dial Peers were changed to:

dial-peer voice 21 pots
 description ** Outbound Emergancy Calls **
 translation-profile outgoing OutgoingDID
 destination-pattern 9[19]..
 direct-inward-dial
 port 0/0/0:15
 forward-digits 3
!
dial-peer voice 22 pots
 description ** Local Calls **
 translation-profile outgoing OutgoingDID
 destination-pattern 902T
 direct-inward-dial
 port 0/0/0:15
 forward-digits 7
!
dial-peer voice 23 pots
 description ** Mobile Calls **
 translation-profile outgoing OutgoingDID
 destination-pattern 905[0256].......
 direct-inward-dial
 port 0/0/0:15
 prefix 05
!
dial-peer voice 24 pots
 description ** National Calls **
 translation-profile outgoing OutgoingDID
 destination-pattern 90[234679].......
 direct-inward-dial
 port 0/0/0:15
 prefix 0
!
dial-peer voice 25 pots
 description ** International Calls **
 translation-profile outgoing OutgoingDID
 destination-pattern 900T
 direct-inward-dial
 port 0/0/0:15
 prefix 00
!
dial-peer voice 26 pots
 description ** National 600 Calls **
 translation-profile outgoing OutgoingDID
 destination-pattern 9600T
 direct-inward-dial
 port 0/0/0:15
 prefix 600
!
dial-peer voice 27 pots
 description ** National 800 Calls **
 translation-profile outgoing OutgoingDID
 destination-pattern 9800T
 direct-inward-dial
 port 0/0/0:15
 prefix 800
!

Issue is now resolved. I have awarded point to irmoore as he pointed me in the right direction.

Cheers
Si
0

Featured Post

[Live Webinar] The Cloud Skills Gap

As Cloud technologies come of age, business leaders grapple with the impact it has on their team's skills and the gap associated with the use of a cloud platform.

Join experts from 451 Research and Concerto Cloud Services on July 27th where we will examine fact and fiction.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Problem Description:   Couple of months ago we upgraded the ADSL line at our branch office from Home to Business line. The purpose of transforming the service to have static public IP’s. We were in need for public IP’s to publish our web resour…
Shadow IT is coming out of the shadows as more businesses are choosing cloud-based applications. It is now a multi-cloud world for most organizations. Simultaneously, most businesses have yet to consolidate with one cloud provider or define an offic…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

615 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question