Solved

cisco asa temp stop user vpn access

Posted on 2015-02-17
3
10 Views
Last Modified: 2015-05-11
Hi,

Just wanted to know if there was a "easier / preferred way" to stop user ipsec access during some internal
upgrades.

Thank you in advance
0
Comment
Question by:Mongo Peck
  • 2
3 Comments
 
LVL 90

Expert Comment

by:John Hurst
ID: 40614679
Send out a notice, provide the down time window and then kick tardy people off at the required time. That is how I do it.
0
 

Author Comment

by:Mongo Peck
ID: 40614708
Hi,

So theres not way to disable VPN Users ?

Regards
0
 
LVL 90

Accepted Solution

by:
John Hurst earned 500 total points
ID: 40614717
If they are connected, the only way is for them to disconnect / be disconnected.

If they are not connected, disable the tunnel so they cannot connect before you service the VPN hardware
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Join & Write a Comment

If you have an ASA5510 then this sort of thing would be better handled with a CSC Module, however on an ASA5505 thats not an option, and if you want to throw in a quick solution to stop your staff going to facebook during work time, then this is the…
I recently updated from an old PIX platform to the new ASA platform.  While upgrading, I was tremendously confused about how the VPN and AnyConnect licensing works.  It turns out that the ASA has 3 different VPN licensing schemes. "site-to-site" …
In this seventh video of the Xpdf series, we discuss and demonstrate the PDFfonts utility, which lists all the fonts used in a PDF file. It does this via a command line interface, making it suitable for use in programs, scripts, batch files — any pl…
When you create an app prototype with Adobe XD, you can insert system screens -- sharing or Control Center, for example -- with just a few clicks. This video shows you how. You can take the full course on Experts Exchange at http://bit.ly/XDcourse.

744 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

11 Experts available now in Live!

Get 1:1 Help Now