Solved

Cisco MDS 9100 error somehow VMware is involved , very confused on this error "vmwareTrapNotificationActive (Fabric Stack Root)"

Posted on 2015-02-17
3
170 Views
Last Modified: 2015-03-07
I am getting an notification  from my cisco MD 9100 switch  when ever the running config is changed via the CLI ,

it alarms on my open manage via SNMP  

vmwareTrapNotificationActive (Fabric Stack Root) Source IP Addres#
    vmwareTrapNotificationActive Fabric Stack Root alert ID 45333, Source Ip Address is: <router address>

is there any way to suppress this errror ?

is it comming from VMWARE Or CISCO????

thanks
0
Comment
Question by:NAMEWITHELD12
  • 2
3 Comments
 
LVL 13

Accepted Solution

by:
Abhilash earned 500 total points
ID: 40616055
It's coming from Cisco. VMware is sending it to the outbound SNMP Trap host

Check here
http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2095759
0
 
LVL 1

Author Comment

by:NAMEWITHELD12
ID: 40616326
so this is coming from an SMTP trap on the cisco device and then sent to VMware VCOPS and then on to HP openview ?

thanks!!!
0
 
LVL 1

Author Closing Comment

by:NAMEWITHELD12
ID: 40651278
thanks and sorry for the delay
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

In the hope of saving someone else's sanity... About a year ago we bought a Cisco 1921 router with two ADSL/VDSL EHWIC cards to load balance local network traffic over the two broadband lines we have, but we couldn't get the routing to work consi…
This article will show you how to create an ISO CD-ROM/DVD-ROM image (*.iso), and MD5 checksum signature, for use with VMware vSphere Hypervisor 6.5 (ESXi 6.5). It's a good idea to compare checksums, because many installations fail because of a corr…
Advanced tutorial on how to run the esxtop command to capture a batch file in csv format in order to export the file and use it for performance analysis. He demonstrates how to download the file using a vSphere web client (or vSphere client) and exp…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

863 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

19 Experts available now in Live!

Get 1:1 Help Now