Solved

Upgrade T1 (1.5MB) to "bonded" 2 x T1 (3MB) MPLS

Posted on 2015-02-19
2
107 Views
Last Modified: 2015-03-03
Dear Experts,

I need to little help on understanding the requirements to upgrade our services from 1.5MB to 3MB MPLS.  If I already have the existing T1 line, do I need to have another one pulled by my local telecom company?  Or they can magically do everything on their side, and I just need to have the MPLS provider to reconfigure their router?  Please advise.  Thanks.
0
Comment
Question by:swgit
2 Comments
 
LVL 57

Accepted Solution

by:
giltjr earned 500 total points
ID: 40620410
It's up to the vendor that is providing the servers.  If, you have the same ISP they may just order a single T1 and bond the existing one and new one.  They may order two new T1's.

I know that AT&T would order 2 new T1's.  The disadvantage of this is you pay the install charge for 2 new T1's instead of just 1.  The advantage is that you can have the new connection up and running for testing at the same time as your current connection.
0
 
LVL 1

Author Closing Comment

by:swgit
ID: 40642719
Thank you for your input!
0

Featured Post

Windows Server 2016: All you need to know

Learn about Hyper-V features that increase functionality and usability of Microsoft Windows Server 2016. Also, throughout this eBook, you’ll find some basic PowerShell examples that will help you leverage the scripts in your environments!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Issue with  IP address/conflict 10 87
Cisco Supervisor upgrade to 2T 3 46
cradle point vpn to sonicwall 5 45
NAS with google authentication 6 54
Join Greg Farro and Ethan Banks from Packet Pushers (http://packetpushers.net/podcast/podcasts/pq-show-93-smart-network-monitoring-paessler-sponsored/) and Greg Ross from Paessler (https://www.paessler.com/prtg) for a discussion about smart network …
In this article, I am going to show you how to simulate a multi-site Lab environment on a single Hyper-V host. I use this method successfully in my own lab to simulate three fully routed global AD Sites on a Windows 10 Hyper-V host.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

914 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

13 Experts available now in Live!

Get 1:1 Help Now