• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 257
  • Last Modified:

SNMP Traps, Polls Cisco PIX

working with our PRTG server setup SNMP on one of our Cisco ASA devices
looking to setup on PIX firewall
using paessler SNMP tester v. 5.1.3
I have the community string and designated where my snmp-server resides
testing to PIX firewalls no; all other firewalls so far okay
is there a problem with SNMP on the old PIX firewalls?
all help is greatly appreciated
d.elebute
0
David Elebute
Asked:
David Elebute
1 Solution
 
Greg HejlPrincipal ConsultantCommented:
Have you been through this document yet?

http://www.cisco.com/c/en/us/support/docs/security/pix-500-series-security-appliances/13822-pixsnmp.html

also check your access-lists

snmp polling reads the information from the device, snmp traps are notices sent from the device.

http://en.wikipedia.org/wiki/Simple_Network_Management_Protocol

you may also need to import the MIB's, but I'm pretty sure PRTG comes with all the cisco MIB's

this link from paessler may help too.

http://kb.paessler.com/en/topic/1423-how-to-monitor-cisco-asa-firewalls-using-netflow-9-and-prtg
0
 
David ElebuteSystems ConsultantAuthor Commented:
Yes Greg I have read all the links sent
ASA working fine PIX nothing
I am contacting our carrier at the pix locations to see if they are blocking SNMP
thanks again Greg
d.elebute
0
Tackle projects and never again get stuck behind a technical roadblock.
Join Now