Solved

Cisco ASA port forwarding from one public > two private IP's

Posted on 2015-02-20
1
401 Views
Last Modified: 2015-02-22
Hello,

Have inherited an ASA5510 and need some assistance.  Just had an NEC VOIP phone system installed and we have a single IP phone that is going to a remote site that needs UDP access through the ASA public IP > a pair of internal IP's based on port.  I'm not familiar how to do this.  Here is what I have so far:

object network nec1100_cpu
 host 192.168.0.201

obect network nec1100_cpu_out
 host <public IP>

object-group service nec1100_cpu_ports
 description Inbound ports needed for VOIP Registration
 service-object udp destination eq 5060
 service-object udp destination range 5080 5081

access-list outside_access_in extended permit object-group nec11_cpu_ports any object nec1100_cpu

object network nec1100_cpu
 nat (inside,outside) static <public IP>

object network network nec1100_cpu_out
 nat (outside,inside) static 192.168.0.201

 

Now I need to add UDP forwarding for 10020-10083 from the same <public IP> to internal IP 192.168.0.202.  How to accomplish this?

Thanks in advance!
0
Comment
Question by:e2346437
1 Comment
 
LVL 42

Accepted Solution

by:
kevinhsieh earned 500 total points
ID: 40622750
http://serverfault.com/questions/358881/nat-one-public-ip-to-two-inside-servers-on-asa-8-4

Read the above article. You need to use PAT, which will involve defining all of the ports that will be forwarded as part of the network object. You may need multiple network objects per real inside IP.
0

Featured Post

Free Trending Threat Insights Every Day

Enhance your security with threat intelligence from the web. Get trending threat insights on hackers, exploits, and suspicious IP addresses delivered to your inbox with our free Cyber Daily.

Join & Write a Comment

How to configure Site to Site VPN on a Cisco ASA.     (version: 1.1 - updated August 6, 2009) Index          [Preface]   1.    [Introduction]   2.    [The situation]   3.    [Getting started]   4.    [Interesting traffic]   5.    [NAT0]   6.…
I recently updated from an old PIX platform to the new ASA platform.  While upgrading, I was tremendously confused about how the VPN and AnyConnect licensing works.  It turns out that the ASA has 3 different VPN licensing schemes. "site-to-site" …
This video discusses moving either the default database or any database to a new volume.
When you create an app prototype with Adobe XD, you can insert system screens -- sharing or Control Center, for example -- with just a few clicks. This video shows you how. You can take the full course on Experts Exchange at http://bit.ly/XDcourse.

762 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

20 Experts available now in Live!

Get 1:1 Help Now