Change management VLan on HP 5406zl
Hi,
can anybody tell me where (and how) I can change the management VLan on a HP 5406zl
I now have to connect on one specific port on the switch to manage it and it would easier if I can do it from more places...
We have 2 HP 5406zl switches one it setup as router and the second one is connected via an SFP+ module.
all vlans exist on both routing between vlans works fine... the 1 switch still has one port in the default_vlan but I don't need the default_vlan on the second swich...
can anybody tell me where (and how) I can change the management VLan on a HP 5406zl
I now have to connect on one specific port on the switch to manage it and it would easier if I can do it from more places...
We have 2 HP 5406zl switches one it setup as router and the second one is connected via an SFP+ module.
all vlans exist on both routing between vlans works fine... the 1 switch still has one port in the default_vlan but I don't need the default_vlan on the second swich...
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Had to go via the webGui to enable the Management VLan
but once I gave "our default vlan we created" an ip address I could access it.
That wasn't working Saturday, but now it works fine... probably some tagging that was wrong ;-) Anyway you gave a correct answer, So I'll reward it to you ;-)